Use MTCNA Exam Dumps (2021 PDF Dumps) To Have Reliable MTCNA Test Engine

MTCNA PDF Recently Updated Questions Dumps to Improve Exam Score

Introduction to MikroTik Certified Network Associate (MTCNA) Exam

The MikroTik Certified Network Associate (MTCNA) assessment exam was designed to introduce RouterOS software and RouterBoard products to students. Students will be able to install, handle, troubleshoot a MikroTik router, and provide basic services to customers after completing the MTCNA exam course.

This is for those who would like to talk about Router-OS. A good starting point for someone who wants to take their first steps in the routing environment is MTCNA dumps. Anyone who wants to be certified as a MikroTik Certified Network Associate and anyone who wants to join the MikroTik group should take these practice tests.

The exam focusses on the following main topics:

• Firewalls
• Wireless Networks
• IP Addressing
• Use of Router-OS and Routerboard
• PPP
• Simple Queues
• Login
• DHCP server and client
• NAT
• Simple network creation

MikroTik Certified Network Associate (MTCNA) Exam Certified Professional salary

The estimated average salary of MikroTik Certified Network Associate (MTCNA) Exam Certified Professional is listed below:

• India: 5,474,000 INR
• United States: 74,000 USD
• Europe: 62,000 EURO
• United Kingdom: 55,000 POUND

 

NEW QUESTION 107
What is the default TTL (time to live) on a router that an IP packet can experience before it will be discarded?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: A

 

NEW QUESTION 108
What are the two main types of access control lists (ACLs)?
Standard
IEEE
Extended
Specialized

• A. 1 and 2
• B. 2 and 4
• C. 1 and 3
• D. 3 and 4

Answer: C

 

NEW QUESTION 109
To block communications between wireless clients connected to the same access point interface, you should set

• A. 'max-station-count=1'
• B. 'default-authentication=no' and 'default-forwarding=no'
• C. 'default-authentication=no'
• D. 'default-forwarding=no'

Answer: D

 

NEW QUESTION 110
What configuration is added by /ip Hot-Spot setup command? (select all that apply)

• A. /ip dhcp-server
• B. /ip Hot-Spot walled-garden
• C. /queue tree
• D. /ip service
• E. /ip Hot-Spot user

Answer: A,E

 

NEW QUESTION 111
For user in local PPP Secrets/PPP Profiles database, it is possible to

• A. Set max values for transferred data (Rx/Tx)
• B. Allow/deny use of more than one login by this user
• C. Deny services (like telnet) only for this user or for one group of users
• D. Allow only PPPoE login
• E. Allow login by PPPoE and PPTP, but deny login by L2TP

Answer: A,B,D

 

NEW QUESTION 112
Which class of IP address provides a maximum of only 254 host addresses per network ID?

• A. Class A
• B. Class C
• C. Class D
• D. Class B

Answer: B

 

NEW QUESTION 113
What flavor of Network Address Translation can be used to have one IP address allow many users to connect to the global Internet?

• A. PAT
• B. NAT
• C. Dynamic
• D. Static

Answer: A

 

NEW QUESTION 114
In which situations can Netinstall NOT be used to install a RouterBOARD?

• A. The router is connected only to a wireless network
• B. The router is connected only to a secondary Ethernet port
• C. The router does not have an operating system
• D. You do not know the password of the router

Answer: A,B

 

NEW QUESTION 115
What command is used to create a backup configuration?

• A. copy running backup
• B. copy running-config startup-config
• C. config mem
• D. wr mem

Answer: B

 

NEW QUESTION 116
In order to use dynamic keys in your wireless security profile for an AP, you MUST set up the dhcp server to provide the dynamic keys.

• A. false
• B. true

Answer: A

 

NEW QUESTION 117
A DHCP server is configured on a LAN interface which is a port on a bridge. The DHCP server does not start.
What could be the reason(s)?

• A. There may be multiple IP addresses set on the LAN interface
• B. The IP address pool could be incorrectly defined
• C. There might not be an IP address assigned to the LAN Interface
• D. The DHCP server can not run on an interface which is also a bridge port

Answer: D

 

NEW QUESTION 118
Which of the following are layers in the TCP/IP model?
Application
Session
Transport
Internet
Data Link
Physical

• A. 2, 3 and 5
• B. 1 and 2
• C. 1, 3 and 4
• D. 3, 4 and 5

Answer: C

 

NEW QUESTION 119
Which router command allows you to view the entire contents of all access lists?

• A. show access-lists
• B. show all access-lists
• C. show interface
• D. show ip interface

Answer: A

 

NEW QUESTION 120
There can be more than one PPPoE server in a single broadcast domain:

• A. True
• B. False

Answer: A

 

NEW QUESTION 121
Which option in the configuration of a wireless card must be disabled to cause the router to permit ONLY known clients listed in the access list to connect?

• A. Enable Access List
• B. Default Forward
• C. Security Profile
• D. Default Authenticate

Answer: A

 

NEW QUESTION 122
Which of the following allows a router to respond to an ARP request that is intended for a remote host?

• A. Reverse ARP (RARP)
• B. Inverse ARP (IARP)
• C. Proxy ARP
• D. Gateway DP

Answer: C

 

NEW QUESTION 123
Action=redirect allows you to make

• A. Enable Local Service
• B. Transparent HTTP Proxy
• C. Transparent DNS Cache
• D. Forward DNS to another device IP address

Answer: B,C

 

NEW QUESTION 124
If ARP=reply-only is configured on an interface, what will this interface do

• A. Add new IP addresses in /ip arp list
• B. Accept all IP addresses listed in /ip arp as static entries
• C. Add new MAC addresses in /ip arp list
• D. Accept all MAC-addresses listed in /ip arp as static entries
• E. Accept all IP/MAC combinations listed in /ip arp as static entries

Answer: E

 

NEW QUESTION 125
Which class of IP address has the most host addresses available by default?

• A. A
• B. C
• C. B
• D. A and B

Answer: A

 

NEW QUESTION 126
NAT rule is going to catch SMTP traffic and send it to a specific mail server.
What is the correct action for a NAT rule?

• A. dst-nat
• B. tarpit
• C. passthrough
• D. redirect

Answer: A

 

NEW QUESTION 127
Which firewall chain you should use to filter SSH access to the router itself?

• A. prerouting
• B. input
• C. output
• D. forward

Answer: B

 

NEW QUESTION 128
One host on an internal network is accessing an external web page through a MikroTik router that is doing source NAT. Select correct statement about the packets that flow from that web page to the host ?

• A. Packets go through the forward chain
• B. Packets go through the output chain
• C. Packets go through the input chain before the routing decision and after that through output chain
• D. Packets go through the input chain

Answer: A

 

NEW QUESTION 129
What is the default protocol/port of (secure) winbox?

• A. TCP/22
• B. TCP/8291
• C. UDP/5678
• D. TCP/8080

Answer: B

 

NEW QUESTION 130
Which command is used to determine if an IP access list is enabled on a particular interface?

• A. show access-lists
• B. show interface
• C. show interface access-lists
• D. show ip interface

Answer: B

 

NEW QUESTION 131
What command will display the line, protocol, DLCI, and LMI information of an interface?

• A. sh pvc
• B. show run
• C. show interface
• D. show frame-relay pvc

Answer: C

 

NEW QUESTION 132
......

MTCNA Dumps Full Questions with Free PDF Questions to Pass: https://www.vce4dumps.com/MTCNA-valid-torrent.html

Free MTCNA - MikroTik Training MTCNA Official Cert Guide PDF Download: https://drive.google.com/open?id=1k0nhttGGwldInGAlgegBqOfkMWMlSV7O