[Oct 19, 2021] Get Free Updates Up to 365 days On Developing MTCNA Braindumps

Best Quality MikroTik MTCNA Exam Questions

NEW QUESTION 101
What layer in the TCP/IP stack is equivalent to the Transport layer of the OSI model?

• A. Application
• B. Host-to-Host
• C. Network Access
• D. Internet

Answer: B

 

NEW QUESTION 102
Mark all features that are compatible with Nstreme

• A. Bridging a device in station mode with a device in ap-bridge mode
• B. Encryption
• C. WDS between a device in station-wds mode and a device in station-wds mode
• D. WDS between a device in ap-bridge mode with a device in station-wds mode

Answer: D

 

NEW QUESTION 103
During a scan, in order to see all the available wireless frequencies that are supported by the card, the following option must be selected in the wireless card's "Frequency Mode":

• A. superchannel
• B. manual txpower
• C. regulatory domain

Answer: A

 

NEW QUESTION 104
Which is the default port of IP-Winbox?

• A. TCP 80
• B. UDP 8291
• C. TCP 8291
• D. TCP 8192

Answer: C

 

NEW QUESTION 105
Which firewall chain should you use to filter clients HTTP traffic going through the router?

• A. prerouting
• B. forward
• C. input
• D. output

Answer: B

 

NEW QUESTION 106
Which of the following is NOT a valid MAC Address?

• A. 95:B5:DD:EE:78:8A
• B. 80:GF:AA:67:13:5D
• C. 13:16:86:53:89:43
• D. EA:BA:AA:EE:FF:CB
• E. 88:0C:00:99:5F:EF

Answer: B

 

NEW QUESTION 107
What command is used to create a backup configuration?

• A. config mem
• B. copy running backup
• C. wr mem
• D. copy running-config startup-config

Answer: D

 

NEW QUESTION 108
How many wireless clients can connect, when wireless card is configured to mode=bridge?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: C

 

NEW QUESTION 109
What is a stub network?

• A. A network that has only one entry and exit point.
• B. A network with only one entry and no exit point.
• C. A network with more than one exit point.
• D. A network with more than one exit and entry point.

Answer: A

 

NEW QUESTION 110
You have a DHCP server on your MikroTik router. The IP addresses 10.1.2.2-10.2.2.20 are distributed in the DHCP network. Additionally, 3 static IP address are defined for your servers: 10.1.2.31-10.1.2.33.
After a while 20 more IP addresses need to be distributed in the network. It is possible to distribute the extra IP address without adding another DHCP Server:

• A. False
• B. True

Answer: A

 

NEW QUESTION 111
You would like to allow multiple logins with one user name on a Hot-Spot server. How should this be configured?

• A. Set "Shared Users" option at /ip Hot-Spot user profile
• B. Set "Shared Users" option at /ip Hot-Spot
• C. It's not possible
• D. Set "only-one=no' at /ip Hot-Spot

Answer: A

 

NEW QUESTION 112
When sending out an ARP request, an IP host is expecting what kind of address for an answer?

• A. 802.11g
• B. MAC Address
• C. VLAN ID
• D. IP address

Answer: B

 

NEW QUESTION 113
If 'check-gateway' is enabled for an ECMP route and one of the gateways is unreachable, then:

• A. The unreachable gateway is not going be used in Round Robin algorithm.
• B. ECMP is going to send packets to all gateways even if one is unreachable.
• C. The ECMP route becomes inactive.

Answer: A

 

NEW QUESTION 114
How many usable IP addresses are there in a 20-bit subnet?

• A. 0
• B. 1
• C. 2
• D. 3
• E. 4

Answer: D

 

NEW QUESTION 115
Is action=masquerade allowed in chain=dstnat?

• A. yes, but it works only for incoming connections
• B. no
• C. yes, but only if dst-addr is specified
• D. yes

Answer: B

 

NEW QUESTION 116
Why is it useful to set a Radio Name on the radio interface?

• A. To identify a station in the Access List:
• B. To identify a station in a list of connected clients
• C. To identify a station in Neighbor discovery

Answer: A

 

NEW QUESTION 117
A client uses a RouterBOARD1000. The clock is configured in '/system clock'. The clock resets to default after each reboot.
Select the best solution for the problem.

• A. Configure '/system ntp server' and set a valid and reachable NTP client address.
• B. Open the router and ensure the CMOS battery is fine.
• C. Configure '/system ntp client' and set a valid and reachable NTP server address.
• D. Write a script in '/system script' to set the clock

Answer: C

 

NEW QUESTION 118
On the advanced menu of the wireless setup there is a parameter called "Area", it works directly with:

• A. Security Profile
• B. Access List
• C. None of these
• D. Connect List

Answer: D

 

NEW QUESTION 119
Select minimal set of software packages in RouteOS required to configuring a wireless AP

• A. dhcp
• B. System
• C. Wireless
• D. advanced-tools
• E. routing

Answer: B,C

 

NEW QUESTION 120
......

MikroTik Exam Practice Test To Gain Brilliante Result: https://www.vce4dumps.com/MTCNA-valid-torrent.html

Tested Material Used To MTCNA: https://drive.google.com/open?id=1zxBW5iuHA8qDILDH6KeFON-4eI1e77w5