[Sep 03, 2021]  JN0-362 PDF Dumps is essential on your JN0-362 Exam Questions Certain Success!

JN0-362 PDF Questions - Perfect Prospect To Go With JN0-362 Practice Exam

NEW QUESTION 37
Click the Exhibit button.

Referring to the exhibit what are two reasons for the configuration stanza? (Choose two.)

• A. to mark the tunnel down after the hold-time expires
• B. to mark the tunnel up after the hold-time expires
• C. to remove the tunnel interface from inet.0 after the hold-time expires
• D. to reduce the risk of forwarding traffic through a stateless tunnel

Answer: A,D

 

NEW QUESTION 38
Click the Exhibit button.

Referring to the exhibit, which statement is true?

• A. The router will precalculate a valid path through the network for LSP r1-to-r3
• B. The router will analyze the traffic engineering database to determine the best path through the network
• C. The router will prune links with insufficient bandwidth from the path before beginning the signaling process
• D. The router will attempt to signal the LSP along the IGP shortest path to 192.168.100.1

Answer: C

 

NEW QUESTION 39
To prevent fragmentation issues across a GRE tunnel, which MTU value is recommended for the tunnel to accommodate most IP packets?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: C

 

NEW QUESTION 40
Click the Exhibit button.

Referring to the exhibit, how many milliseconds must pass before the interface ge-0/0/1.0 is considered down?

• A. 2400 ms
• B. 1200 ms
• C. 900 ms
• D. 1600 ms

Answer: B

 

NEW QUESTION 41
Click the Exhibit button.

Referring to the exhibit, which two statements are correct? (Choose two.)

• A. The router will install the 0.0.0.0/0 route into the routing table when any BGP prefixes are present
• B. The router will install the 0.0.0.0/0 route into the routing table when no BGP prefixes are present
• C. The router will remove the 0.0.0.0/0 route from the routing table when any BGP prefixes are present
• D. The router will remove the 0.0.0.0/0 route from the routing table when no BGP prefixes are present

Answer: A,D

 

NEW QUESTION 42
Click the Exhibit.

You have just configured IS-IS, but the adjacency is not coming up.
Referring to the exhibit, what is the cause?

• A. Only one side is configured using the point-to-point parameter.
• B. One router is configured for Level 2 only.
• C. The family iso parameters is missing on the interfaces.
• D. The routers must be in different areas.

Answer: A

 

NEW QUESTION 43
Click the Exhibit button. What does IS-IS/18 mean in the output displayed in the exhibit?

• A. These routes are internal Level 2 routes.
• B. These routes are external Level 2 routes.
• C. These routes are external Level 1 routes.
• D. These routes are internal Level 1 routes.

Answer: A

 

NEW QUESTION 44
Which two statements are true when considering logical systems? (Choose two.)

• A. Logical systems share the master routing table and can create routing instances
• B. Logical systems do not support nonstop active routing
• C. Logical systems provide management separation by providing user access per logical system
• D. Logical tunnels cannot be used to connect logical systems

Answer: C,D

 

NEW QUESTION 45
Which two statements are correct about default BGP route propagation? (Choose two.)

• A. EBGP speakers advertise IBGP-learned routes to other EBGP peers.
• B. IBGP speakers advertise EBGP-learned routes to other IBGP peers.
• C. EBGP speakers advertise IBGP-learned routes to other EBGP peers by using apolicy.
• D. IBGP speakers advertise IBGP-learned routes to other IBGP peers.

Answer: B,C

 

NEW QUESTION 46
A customer pays for the bandwidth on a per-packet basis. The network administrator wants to constrain costs and prevent Layer 2 loops on a multihomed Layer 2 WAN network.
Which technology would satisfy these requirements?

• A. Multiple Spanning Tree Protocol
• B. Loop protection
• C. MPLS over GRE
• D. Rapid Spanning Tree Protocol

Answer: B

 

NEW QUESTION 47
Click the Exhibit button.

You are troubleshooting a new BGP peering session which is not establishing.
Referring to the exhibit, which statement is true?

• A. The peer's AS number is misconfigured
• B. The neighbor does not support IPv6
• C. The TCP session is not establishing
• D. The update messages contain an unsupported option

Answer: A

 

NEW QUESTION 48
Click the Exhibit button.

In the network shown in the exhibit, all switches are configured with the default STP root bridge priority, and Switch A has been selected as root. You recently added the older Switch D into the network as an access switch, and notice it has taken over as root.
Which configuration would solve this problem?

• A. Option D
• B. Option C
• C. Option A
• D. Option B

Answer: B

 

NEW QUESTION 49
You notice that a route from internal BGP peer 192.168.1.1 is missing from the local route table.Which two commands would be used to help identify the source of the problem? (Choose two.)

• A. show route receive-protocol bgp 192.168.1.1
• B. show route bgp
• C. show route protocol bgp hidden
• D. show route advertising-protocol bgp 192.168.1.1

Answer: A,C

 

NEW QUESTION 50
Because of recent network failures, additional circuits have been purchased. In addition, Fast reroute has been configured on critical MPLS LSPs.
When the next failure occurs, which two time intervals will affect fast reroute? (Choose two.)

• A. The amount of time to detect a link or node failure
• B. The amount of time required to recalculate the best detour
• C. The amount of time it takes to ping the gateway on the detour link
• D. The amount of time required to reroute the traffic onto the detour

Answer: A,D

 

NEW QUESTION 51
By default, which BGP attribute is only compared when two route advertisements are received from the same neighboring AS?

• A. Next Hop
• B. Communities
• C. MED
• D. AS-Path

Answer: C

 

NEW QUESTION 52
Click the Exhibit button.

You must create a static route on Router-A to the 10.10.5.0/24 network using 10.10.3.2 as the next hop.
Referring to the exhibit, which configuration accomplishes this task?

• A.
• B.
• C.
• D.

Answer: C

 

NEW QUESTION 53
Click the Exhibit.

You are planning the addition of a new EX3400 Series device to the network (EX-3400-7) to service MSTI-1 and MSTI-2.
Referring to the exhibit, which requirement must be met on EX-3400-7 for the MSTP instances to become fully operational and resilient?

• A. The MSTP revision-level must be incremented.
• B. The bridge-priority must match EX-3400-5 and EX-3400-6.
• C. The CIST must be extended to EX-3400-7.
• D. The MSTP configuration-name must be the same.

Answer: D

 

NEW QUESTION 54
......

JN0-362 Exam with Accurate Service Provider Routing and Switching, Specialist (JNCIS-SP) PDF Questions: https://www.vce4dumps.com/JN0-362-valid-torrent.html