[Oct-2021] Verified Juniper Exam Dumps with JN0-362 Exam Study Guide

Best Quality Juniper JN0-362 Exam Questions VCE4Dumps Realistic Practice Exams [2021]

NEW QUESTION 28
Which forwarding table designation is used to indicate that load balancing is working correctly?

• A. mlst
• B. ucst
• C. msct
• D. ulst

Answer: D

 

NEW QUESTION 29
Which two statements describe operations performed by the encapsulating tunnel endpoint in an IP-IP tunnel?
(Choose two.)

• A. It creates and adds a new inner IP header with the remote destination device's IP address
• B. It modifies the source and destination addresses in the inner IP header
• C. It adds an outer IP header with the destination address of the remote tunnel endpoint
• D. It decrements the time-to-live (TTL) counter by one in the inner IP header

Answer: C,D

 

NEW QUESTION 30
Click the Exhibit button.

Referring to the exhibit, which two statements are true? (Choose two.)

• A. The OSPF neighbor will be declared down if 500 BFD hello packets are missed
• B. The OSPF neighbor will be declared down if BFD hello packets are not received for 5 seconds
• C. The OSPF neighbor will be declared down if BFD hello packets are not received for 1.5 seconds
• D. The OSPF neighbor will be declared down if three BFD hello packets are missed

Answer: C,D

Explanation:
Explanation

 

NEW QUESTION 31
Click the Exhibit button.

Referring to the exhibit, the GRE tunnel between R-1 and R-2 allows connectivity between User-1 and Server-1. When User-1 communicates with Server-2 with packets that are 1472 bytes in size, no packet fragmentation occurs. User-1 can communicate with Server-1 with packets that are up to 1448 bytes in size with no packet fragmentation. However, if the packet size is larger than 1448 bytes, packet fragmentation occurs.
Why is the packet fragmentation occurring between User-1 and Server-1 in this scenario?

• A. The GRE header adds 20 bytes to the packet
• B. The GRE header adds 24 bytes to the packet
• C. The IP header adds 24 bytes to the packet
• D. The IP header adds 20 bytes to the packet

Answer: B

 

NEW QUESTION 32
You have a stub OSPF area running in your network. Your supervisor has asked you to build a virtual link across this area to connect new equipment acquired in a recent ISP acquisition.Which statement is correct about this scenario?

• A. Type 5 LSAs would be blocked in a stub area.
• B. Type 5 LSAs would carry external information across your transit area to the backbone.
• C. Type 5 LSAs would be seen only in the newly attached area.
• D. Type 5 LSAs would be converted to type 7 LSAs.

Answer: A

 

NEW QUESTION 33
Click the Exhibit button.

Referring to the exhibit, why is the route hidden?

• A. The wrong BGP address family is enabled for the BGP session
• B. The protocol next hop is not reachable
• C. The MPLS LSP to the 192.168.0.2 peer is down
• D. The route has yet to be verified

Answer: B

 

NEW QUESTION 34
What is the correct description of an Area Border Router (ABR)?

• A. An ABR is an OSPF router with at least one link in a Layer 2 area
• B. An ABR is an OSPF router with all of its links within an area
• C. An ABR is an OSPF router with links in two areas, connecting OSPF areas to the backbone
• D. An ABR is an OSPF router that injects routing information from outside the OSPF AS

Answer: C

 

NEW QUESTION 35
Click the Exhibit button.

You must create a static route on Router-A to the 10.10.5.0/24 network using 10.10.3.2 as the next hop.
Referring to the exhibit, which configuration accomplishes this task?

• A. Option A
• B. Option D
• C. Option B
• D. Option C

Answer: B

 

NEW QUESTION 36
You are logged into a PE router participating in a Layer 3 VPN as defined in RFC 4364. You would like to ping the remotely connected CE router's loopback address. The address of the loopback is
122.161.2.1, the VPN routing-instance is called VPN-C.Which command will accomplish this goal?

• A. ping vpn-instance VPN-C 122.161.2.1
• B. ping VPN-C 122.161.2.1
• C. ping instance VPN-C 122.161.2.1
• D. ping routing-instance VPN-C 122.161.2.1

Answer: D

 

NEW QUESTION 37
Click the exhibit.

A customer has two VLANs to extend between Site-1 and Site-2. The customer does not want to route the VLANs or renumber the VLANs.
Referring to the exhibit, which two VLAN IDs are egressing the MX Series device towards the optical transport network after translation? (Choose two.)

• A. 0
• B. 1
• C. 2
• D. 3

Answer: A,D

 

NEW QUESTION 38
Which three attributes are well-known mandatory BGP attributes? (Choose three.)

• A. MED
• B. next-hop
• C. origin
• D. AS path
• E. local preference

Answer: B,C,D

Explanation:
Explanation/Reference: https://www.kwtrain.com/blog/bgp-pt2

 

NEW QUESTION 39
What is the purpose of STP BPDUs?

• A. to determine the root bridge
• B. to determine the root-alternate port
• C. to determine the least cost path
• D. to exchange MAC addresses

Answer: C

 

NEW QUESTION 40
Click the exhibit.

In the exhibit, which two routers will perform a swap action on LSP1? (Choose two.)

• A. R3
• B. R2
• C. R4
• D. R1

Answer: B,D

 

NEW QUESTION 41
Which two high availability features preserve interface and kernel information during reconvergence? (Choose two.)

• A. graceful restart (GR)
• B. nonstop bridging (NSB)
• C. graceful Routing Engine switchover (GRES)
• D. nonstop active routing (NSR)

Answer: C,D

 

NEW QUESTION 42
What are two benefits of using an OSPF designated router (DR)? (Choose two.)

• A. Reduces the size of the link-state database.
• B. Reduces LSA flooding throughout an OSPF area.
• C. Reduces LSA flooding on a broadcast segment.
• D. Reduces router resources used.

Answer: C,D

 

NEW QUESTION 43
You are establishing RSVP LSPs through your MPLS-enabled network. You are asked to ensure that the LSPs will support end-to-end class-of-service handling.
Which statement is correct in this scenario?

• A. Configure implicit-null on all MPLS-enabled devices.
• B. Configure entropy-label on the egress device.
• C. Configure ultimate-hop-popping on the egress device.
• D. Configure explicit-null on all MPLS-enabled devices.

Answer: D

 

NEW QUESTION 44
You want to disable MAC learning only for interface ge-0/0/0.0 on an MX Series device.
Which syntax will accomplish this task?

• A.
• B.
• C.
• D.

Answer: D

Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/layer-2-services- mac-bridge-domain-or-logical-interface-disabling-learning-for.html

 

NEW QUESTION 45
Which three statements are true regarding the show system switchover operational mode command? (Choose three.)

• A. This command displays the status of the interface and process databases.
• B. This command can only be issued on the backup Routing Engine.
• C. This command displays the status of the kernel database.
• D. This command displays the status of graceful switchover.
• E. This command can only be issued on the master Routing Engine.

Answer: B,C,D

 

NEW QUESTION 46
Click the Exhibit button.

Referring to the exhibit, which statement is correct?

• A. Routes from 10.3.3.3 are more preferred than the default local preference
• B. Routes from 10.1.1.1 are more preferred than routes from 10.2.2.2
• C. Routes from 10.2.2.2 are less preferred than routes from 10.3.3.3
• D. Routes from 10.2.2.2 are less preferred than the default local preference

Answer: A

 

NEW QUESTION 47
Click the Exhibit button.

Which type of route is shown in the exhibit?

• A. kernel
• B. generate
• C. aggregate
• D. static

Answer: B

 

NEW QUESTION 48
......

Authentic Best resources for JN0-362: https://www.vce4dumps.com/JN0-362-valid-torrent.html