[May-2023] HPE0-S59 Exam Dumps Pass with Updated 2023 HPE Compute Solutions

Free HPE0-S59 Exam Dumps to Pass Exam Easily

The HP HPE0-S59 exam is designed for IT professionals who are looking to enhance their skills in deploying HPE compute solutions. This exam is a part of the HPE ASE – Server Solutions Architect V4 certification, which is highly recognized in the industry. Passing this exam validates your expertise in designing and implementing HPE compute solutions.

To pass the HPE0-S59 exam, candidates must have a thorough understanding of HPE compute solutions and demonstrate their ability to design, implement, and manage these solutions effectively. Candidates must also have practical experience working with HPE compute solutions and be familiar with the latest industry trends and best practices. The exam consists of 60 multiple-choice questions, and candidates have 90 minutes to complete it.

 

NEW QUESTION # 34
Your customer reports mat an external FC boot volume for Windows server is visible four times in the Disk Management 1 online and 3 offline.
What should you do to resolve this issue?

• A. Disable deduplication for this volume at the array level
• B. Remove the offline disks using array management tools
• C. Remove the offline disks using Windows Disk Management
• D. Install and configure MPIO on me Windows system

Answer: D

NEW QUESTION # 35
Match HPE SimpliVity team with the definition.

Answer:

Explanation:

NEW QUESTION # 36
You configured a vVoI datastore using HPE Storage integration Pack for VMware vCenter.
Which storage object should you check using SSMC to verify whether vVol datastore is configured property?

• A. virtual Volume
• B. App Volume Set
• C. Virtual Volume Set
• D. Storage Container

Answer: C

NEW QUESTION # 37
Your customer wants to compare HPE Superdome Flex with HPE Superdome Flex 280.
Which statement about these two systems is true?

• A. Only HPE Superdome Flex supports HPE Persistent Memory
• B. Only HPE Superdome Flex 280 can support multiple nPars
• C. Only HPE Superdome Flex supports 32 sockets and 48TB of memory
• D. Only HPE Superdome Rex 280 can be managed using HPE OneView

Answer: D

NEW QUESTION # 38
Match each HPE OneView network type with its definition.

Answer:

Explanation:

NEW QUESTION # 39
Your customer has me following HPE Synergy setup
- Three frames fully populated with HPE Synergy 480 Gen10 Plus modules and 25Gb/s downlink speed formulating a single logical enclosure
- Two HPE Virtual Connect SE 100Gb F32 Module for Synergy
- Four HPE Synergy 50Gb interconnect Link Module
- Six HPE Synergy Virtual Connect SE 32Gb FC Modules
The customer needs to add a frame.
Which statement about the expansion of this setup is true?

• A. The customer has to create a new logical enclosure for the additional frame
• B. The additional frame must have HPE Virtual Connect FC modules installed
• C. The additional frame cannot have 12Gb SAS connection modules installed
• D. The customer can grow the existing logical enclosure up to 5 frames

Answer: A

NEW QUESTION # 40
Your customer has the following HPE Synergy setup
- 3 HPE Synergy 12000 Frames
- 4 HPE Virtual Connect SE 100 Gb F32 Modules
- 2 HPE Synergy 50 GO Interconnect Link Modules
- 36 HPE Synergy 480 Gen10 Plus compute modules
- 2 HPE Composer 2 modules
Which statement about this setup is true?

• A. The customer can add one D3940 storage Module to each of the frames
• B. The customer must buy 36 HPE OneView Advanced licenses to manage compute modules
• C. To use all compute nodes, the customer must create at least two logical enclosures
• D. To manage all frames, the customer must buy two additional HPE Composer 2 modules

Answer: B

NEW QUESTION # 41
Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?

• A. If the D3940 storage module is property licensed through HPE OneView interface.
• B. If there Is a logical interconnect created based on the 12Gb SAS switches.
• C. If the D3940 module is imported in managed state that allows volume provisioning.
• D. If there is at least one ISCSI network configured that will provide access to the module.

Answer: C

NEW QUESTION # 42
An HPE Synergy customer needs to prevent a timeout and loss of communication during an external switch firmware upgrade.
Click the parameter that the customer should configure within an uplink set to meet this requirement

Answer:

Explanation:

NEW QUESTION # 43
You need to setup HPE Synergy frames after hardware components are discovered within HPE OneView.
Put the steps to achieve this goal into the coned order in the answer area on the right.

Answer:

Explanation:

NEW QUESTION # 44
Which statement about HPE Superdome Flex 280 is true?

• A. It must be equipped with at least 768 GB of memory.
• B. it cannot be managed using HPE OneView.
• C. It supports 2 to 8 sockets in 2-socket increments.
• D. It can support up to two nPars with an external RMC.

Answer: A

NEW QUESTION # 45
Your customer is implementing an HPE Synergy solution based on three frames.
Click each of the ports that can be used to connect satellite modules.

Answer:

Explanation:

NEW QUESTION # 46
Your customer plans to deploy VMware ESXi 7 0 U2 and they are looking for a hardware platform mat wilt allow them to use up to 24 TB of physical memory.
Which HPE compute system meets this customer's requirements?

• A. HPE Superdome Flex 280
• B. HPE ProLiant DL380 Gen 10 Plus
• C. HPE ProLiant DL560 Gen10
• D. HPE Synergy 480 Gen10 Plus

Answer: B

NEW QUESTION # 47
Refer to the exhibit.

Which statement about this logical JBOD is true?

• A. After deleting this logical JBOD, its drives w not be available until a clean-up procedure 6 done
• B. After deleting this logical JBOD drives will he blocked for 12h m case this JBOD must be re-created
• C. This logical JBOD can be connected to multiple systems to formulate a snared datastore.
• D. This logical JBOD can be presented to the compute nodes in a different frame.

Answer: A

NEW QUESTION # 48
What is a limitation when creating a server profile?

• A. Administrator cannot define more than 8 connections within a server profile
• B. It is not possible to create shared volumes on demand through a server profile
• C. BIOS settings can be changed only when UEFI optimized is selected as boot mode
• D. ILO management is limited to the integration with Active Directory or LDAP

Answer: D

NEW QUESTION # 49
What is a restriction of using a RoCE network?

• A. It is by default configured as an untagged network and cannot be a part of a network set.
• B. It does not support smart link and private network features.
• C. It does not support Private VLAN and Multicast VLAN.
• D. it is not supported with HPE Virtual Connect SE 40 GD F8 Module for HPE Synergy.

Answer: A

NEW QUESTION # 50
Which HPE Virtual Connect feature allows an administrator to suppress excessive inbound multicast broadcast and destination lookup failure (OLF) packets?

• A. Loop protection
• B. LLDP tagging
• C. Storm control
• D. Pause flood protection

Answer: C

NEW QUESTION # 51
Your customer plans to deploy ESXi systems to HPE Synergy and HPE ProLiant servers using HPE OneView for VMware vCenter Server.
Which statement about HPE OneView for VMware vCenter Server functionality is true for this environment?

• A. Individual systems can be added to HPE OneView for VMware vCenter Server through an ILO management processor
• B. HPE Synergy requires HPE Composer 2 for full functionality of HPE OneView for VMware vCenter Server
• C. Only systems managed using HPE Oneview can use HPE Oneview for VMware vCenter Server functionalities
• D. HPE ProLiant servers need an HPE OneView for VMware vCenter Server license for full functionality

Answer: D

NEW QUESTION # 52
Which statement about HPE Apollo 2000 Gen10 Plus platform is true?

• A. It can support a single processor only and up to 4 per chassis
• B. It offers servers with AMD EPYC and Intel Xeon Scalable CPUs
• C. It is fully managed using HPE OneView including all connections
• D. It is equipped with HPE Persistent memory by default

Answer: A

NEW QUESTION # 53
Refer to the exhibit.

Which statement about this logical interconnect group is true?

• A. Both modules are located in different frames for redundancy
• B. For an uplink set, ports from different modules can be selected
• C. An additional license is required to change the enclosure count
• D. interconnect modules are installed in interconnect bays 1 and 4

Answer: C

NEW QUESTION # 54
Your customer wants to add dedicated Fibre Channel connectivity to the HPE Synergy frame running HPE Synergy 480 Gen10 compute modules, each with one CPU socket populated Currently they use two 12 Gb SAS switches and two HPE Virtual Connect SE 100Gb F32 Modules for HPE Synergy installed in third fabric.
What must be done to enable dedicated FC connectivity for this HPE Synergy frame?

• A. SAS switches must be moved to second fabric and FC modules Installed in the first one.
• B. For Brocade switches, a logical interconnect group must be created in HPE OneView.
• C. A second CPU must be installed for all HPE Synergy 480 Gen10 compute nodes.
• D. For VC-FC modules, all of server facing ports must be property licensed.

Answer: A

NEW QUESTION # 55
You plan to configure a Link Aggregation Group (LAG) for two connections within a server profile for a compute node running an ESXI system.
What is required from the VMware side to enable LAG?

• A. Load balancing cluster
• B. Virtual Distributed Switch
• C. Dedicated VMKernel port
• D. vSphere Standard license

Answer: C

NEW QUESTION # 56
Your customer plans to add four HPE Synergy frames to an existing management ring Ail installed frames are equipped with two 2-port FLM modules, while new frames will be equipped with 4-port FLM modules.
Which statement about mixing different FLM modules is true?

• A. Existing 2-port FLM modules must be replaced with 4-port FLM modules
• B. Mixing different FLM modules is allowed if all of them have the same firmware version
• C. A management ring with mixed FLM modules cannot have more than 12 frames
• D. A management ring can contain mixed frame link module configurations

Answer: C

NEW QUESTION # 57
......

HPE0-S59 Exam Dumps, HPE0-S59 Practice Test Questions: https://www.vce4dumps.com/HPE0-S59-valid-torrent.html

Free HPE0-S59 Study Guides Exam Questions and Answer: https://drive.google.com/open?id=1aMqSsBY2cFeyiW24rDF30I0pWKYloifx