Go to 300-510 Questions - Try 300-510 dumps pdf
Dumps Practice Exam Questions Study Guide for the 300-510 Exam
Difficulty in Writing Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam
The Implementation of the Cisco Service Provider VPN Services (300-510) certification is one of the most important certifications that applicants can have on their CV. One of the biggest challenges for many candidates is to use the Internet to find so many details that make it impossible for them to believe, which would be beneficial for them to choose the correct 300-510 SPRI practice test.
However, applicants can clear the examination with the correct concentration and the correct preparatory material. VCE4Dumps have the most up to date 300-510 SPRI dumps that allows a clear understanding of the pattern in questions raised by these dumping aspirants with real certification. The experts track qualification questions for all the changes in the course. Certification problems also require realistic research, which is an ideal forum to test the knowledge that is collected. For the study content, refer to the links below.
Official Course for Exam 300-510: Overview
The course created for 300-510 test is otherwise called ‘Implementing Cisco Service Provider Advanced Routing Solutions (SPRI) v1.0’. It is theory as well as practical based and covers the integration of advanced technologies for routing. This includes multicast routing, routing protocols, policy language, segment routing, and MPLS (Multiprotocol Label Switching). Thus, students will be able to expand their skills and awareness as concerns core networks associated with the Service Provider. Such a course as well is a way to boost your readiness for 300-510 exam. Each exam topic in this training is adequately traversed to ensure your knowledge in addition to skills are expansive and deep within the domain. By and large, there are varied ways to approach this course, including e-Learning, instructor-led classroom learning, and digital or virtual learning. The overall procedure lasts for 5 days, where candidates will be covering content through theory as well as practice since the course modes, except for e-Learning, combine practical labs and theory. Passing through instruction included in this class for 300-510 renders you with highly demanded skills for maintaining and operating advanced technologies that associate with core networks about the Service Provider. Another matter concerns enhancing your skills that are into the executing of SP core technologies. There is also the bit about gaining 40 CE credits that will go towards certificate renewal at the end of three years, which is the certification validity period.
NEW QUESTION 36
Refer to the exhibit.
Router 1 is a core ABR in a Cisco Unified MPLS environment. All of the router 1 BGP peers are established, but traffic between customers is failing. Which BGP configuration must be added to the configuration?
- A. It must be configured with a route reflector
- B. It must be configured for graceful restart
- C. It must be configured with PIC edge
- D. It must be configured with send labels
Answer: D
NEW QUESTION 37
Refer to the exhibit.
A network operator must stop 10.33.33.33/32 from being redistributed into Level 1 router XR1. Which configuration meets this need?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: D
NEW QUESTION 38
Refer to the exhibit.
A service provider technician is working on a multicast issue for a customer. While checking the multicast table, the technician notices that no flags are present for the (1.1.1.1, 239.1.1.1) entry, yet flags are present for the (1.1.1.1, 232.1.1.1) entry.
Which factor might explain this issue?
- A. Only ASM is permitted
- B. Only GLOP is permitted
- C. Only the administratively scoped range is permitted
- D. Only the default SSM range is permitted
Answer: D
NEW QUESTION 39
Refer to the exhibit.
CE1 and CE2 cannot communicate through the service provider BGP peering is established between PE1 and PE2. IS-IS is the only routing protocol running in the service provider core.
What
step can be done to troubleshoot the issue?
- A. Switch the IGPs running in the core from IS-IS to OSPF to support a Cisco MPLS TE tunnel from PE1 to PE2.
- B. Verify the MPLS LSPs.
- C. Configure BGP between CE and PE routers.
- D. Confirm that IS-IS is running with metric-style narrow.
Answer: D
NEW QUESTION 40
Refer to the exhibit.
An engineer has successfully fixed BGP peering issue. R1 has an established eBGP peering with R2 and R3. Which mechanism should the engineer apply in order to steer the traffic correctly?
- A. The weight attribute can be applied on R2 to influence AS 65513 to use AS 65515 as the primary path.
- B. The MED attribute can be applied on R2 to influence R1 to use it as the primary path.
- C. The local preference attribute can be applied on R3 to influence AS 65513 to use AS 65515 as the secondary path.
- D. The IGP metric can be manipulated on R1 to allow traffic to be load balanced between R2 and R3.
Answer: D
NEW QUESTION 41
Refer to the exhibit.
Which effect of this configuration is true?
- A. It sets the hold timer to 30 milliseconds and the keepalive timer to 240 milliseconds
- B. It sets the keepalive timer to 30 seconds and the hold timer to 240 seconds.
- C. It sets the keepalive timer to 30 milliseconds and the hold timer to 240 milliseconds
- D. It sets the hold timer to 30 seconds and the keepalive timer to 240 seconds
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_bgp/command/irg-cr-book/bgps1.
html#wp1552800140
NEW QUESTION 42
After changing the IP address on an IOS XR router, an engineer cannot ping the new address Which step did the engineer forget to complete?
- A. save the running configuration
- B. roll back the configuration
- C. merge the configuration
- D. commit the configuration
Answer: D
NEW QUESTION 43
Refer to the exhibit.
XR1 and XR2 are sending the prefix 10.11.11.0/24 to XR3. A configured policy on XR1 is incorrectly prepending AS path 11 11 12 12 onto this prefix. A network operator wants to add a policy onto XR3 that will not allow the falsely prepending prefix from being installed. Which policy configuration applied to the XR3 neighbor configuration for XR1 can accomplish this requirement without impact to other or future received routes?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: A
Explanation:
Reference:
b_routing_cr41crs/b_routing_cr41crs_chapter_01000.html#wp3850885229
NEW QUESTION 44
Refer to the exhibit.
An engineer is addressing an IS-IS design issue which is running within the topology. All links are running on FastEthernet, except the link between R5 and R4, which is Gigabit Ethernet. Which statement about the design is true?
- A. All links have equal cost if the default metric is used
- B. R1 prefer to use R5 as the next hop to reach R4
- C. R5 prefers to use R4 as the next hop for all routes
- D. R4 prefer to reach R5 using R1 as the next hop
Answer: A
NEW QUESTION 45
Refer to the exhibit
Which router does R1 install as an alternate next hop when trying to reach R3 if LFA is enabled?
- A. R3
- B. R2
- C. R4
- D. R5
Answer: B
NEW QUESTION 46
Refer to me exhibit.
A network engineer sets up a multihoming eBGP topology where multiple Autonomous Systems connect to ASN 64501. The engineer wants to block all the routers coming from ASN 64502. but allow all the others. For that purpose, the following AS Pam prefix 1st s being used:
What must be fixed to achieve this result?
- A. The AS-PATH filter must be defined inside the route-map mode
- B. The statement must CM modified with ip as path access list 1 deny A64502$
- C. At the end ip as-path access-list 10 permit .* must be included
- D. The statement must be modified with ip as-path access-list 1 deny _64502_
Answer: C
NEW QUESTION 47
Refer to the exhibit.
Router 1 is a core ABR in a Cisco Unified MPLS environment. All of the router 1 BGP peers are established, but traffic between customers is failing. Which BGP configuration must be added to the configuration?
- A. It must be configured with a route reflector
- B. It must be configured for graceful restart
- C. It must be configured with PIC edge
- D. It must be configured with send labels
Answer: D
NEW QUESTION 48
Refer to the exhibit.
While configuring router 2 with all the default values, a network engineer cannot see any route received in router 1. How should the engineer solve the issue?
- A. Set the network type in S1/0 to point-to-point.
- B. Modify the router ID to be the interface IP on the serial.
- C. Modify the IP address or mask of the interface to a valid one.
- D. Set up a priority different than 0 in the interface.
Answer: C
NEW QUESTION 49
Drag and drop the attributes for the BGP route selection on the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION 50
What is the characteristic of enabling segment routing for IGPs?
- A. Segment routing must be enabled only under the routing process.
- B. Segment routing must first be enabled globally and then under the routing process.
- C. Segment routing must first be enabled under the routing process and then globally.
- D. Segment routing must be enabled only globally.
Answer: B
NEW QUESTION 51
Refer to the exhibit. How are packets directed through the data plane when SRv6 is implemented?
- A. The packet is encapsulated with a header and trailer encoding the ordered list of segments
- B. The MPLS data plane is used to push labels onto IGP routes
- C. A stack of labels represents an ordered list of segments
- D. An ordered list of segments is encoded in a routing extension header
Answer: D
Explanation:
Explanation/Reference: https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/BRKIPM-2249.pdf
NEW QUESTION 52
......
Who should take the Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam
People who wish to explore the power of the dynamic culture of the Cisco Learning Network to jump-start their certification and lifelong learning goals should take this exam. Those who want to get useful tools for IT training for all Cisco certifications should also get this certification. People with prior knowledge of integrating VPN services, including Layer 2, Layer 3, and IPv6, from the service provider are highly recommended to take this exam and get themselves certified from Cisco.
List of the target audience for this exam:
- Network managers
- Network designers
- Network engineers
- Network supervisors
- Network Operations Center (NOC) personnel
- Channel partners
- Network administrators
- Network architects
Free CCNP Service Provider 300-510 Exam Question: https://www.vce4dumps.com/300-510-valid-torrent.html
300-510 Dumps with Practice Exam Questions Answers: https://drive.google.com/open?id=1YKvKmY26JyNxNhNG4V5_g4omwl7s0pLC