Authentic Juniper JN0-363 Exam Dumps PDF - 2024 Updated

Get Prepared for Your JN0-363 Exam With Actual 293 Questions

NEW QUESTION # 75
You are bringing a new network online with three IS-IS routers using default Junos election priorities. The routers are configured as Level 2 only IS-IS routers. Which statement is true about the DIS election in this scenario?

• A. The router with the highest MAC address will be elected as the DIS.
• B. The router with the highest numerical lo0 IP address will be elected as the DIS.
• C. The router with the lowest MAC address will be elected as the DIS.
• D. The router with the lowest numerical lo0 IP address will be elected as the DIS.

Answer: A

Explanation:
A router's priority for becoming the designated router is indicated by an arbitrary number from 0 through 127, which you configure on the IS-IS interface. The router with the highest priority becomes the designated router for the area (Level 1, Level 2, or both), also configured on the IS-IS interface. If routers in the network have the same priority, then the router with the highest MAC address is elected as the designated router. By default, routers have a priority value of 64.
https://www.juniper.net/documentation/us/en/software/junos/is-is/topics/concept/routing-protocol-is-is-security-designated-router-understanding.html

NEW QUESTION # 76
Click the Exhibit button.

Referring to the exhibit, which two statements are true? (Choose two.)

• A. The local-address statement is not required for the BGP session to establish correctly
• B. The configuration is for an internal BGP session
• C. The configuration is for an external BGP session
• D. The local-address statement is required for the BGP session to establish correctly

Answer: B,D

Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/local-address-edit-protocols-bgp.html

NEW QUESTION # 77
Click the Exhibit button. Referring to the exhibit, from which device(s) does R3 learn about Route X?

• A. directly from the router in AS 64502
• B. R2 only
• C. both R2 and R1
• D. R1 only

Answer: D

Explanation:
R2 can not forward IBGP learned routes to another IBGP neighbor to prevent loops.

NEW QUESTION # 78
Click the exhibit.

In the exhibit, which two routers will perform a swap action on LSP1? (Choose two.)

• A. R2
• B. R3
• C. R4
• D. R1

Answer: A,D

NEW QUESTION # 79
What Is a key differentiator of generate routes from aggregate routes?

• A. Generate routes have a default preference value of 210.
• B. Generate routes use a forwarding next hop.
• C. Generate routes have a default next-hop value of reject.
• D. Generate routes cannot be used as a gateway of last resort.

Answer: A

NEW QUESTION # 80
You have configured multiple IP-IP tunnels across your network to provide connectivity to remote sites.Which technique is used to help the IP endpoints in your network determine the optimal packet size to send across your tunnels?

• A. path MTU discovery
• B. end-to-end MTU discovery
• C. fragmentation discovery
• D. packet throughput discovery

Answer: A

NEW QUESTION # 81
What are two benefits of using an OSPF designated router (DR)? (Choose two.)

• A. Reduces the size of the link-state database.
• B. Reduces router resources used.
• C. Reduces LSA flooding on a broadcast segment.
• D. Reduces LSA flooding throughout an OSPF area.

Answer: B,C

NEW QUESTION # 82
Click the Exhibit button.

Referring to the exhibit what are two reasons for the configuration stanza? (Choose two.)

• A. to remove the tunnel interface from inet.0 after the hold-time expires
• B. to mark the tunnel down after the hold-time expires
• C. to reduce the risk of forwarding traffic through a stateless tunnel
• D. to mark the tunnel up after the hold-time expires

Answer: B,C

NEW QUESTION # 83
Click the Exhibit button. Based on the configuration shown in the exhibit, what will be the state of the IS-IS levels on interface ge-0/0/0.100?

• A. Level 1 is enabled and Level 2 is disabled.
• B. Level 1 is disabled and Level 2 is enabled.
• C. Level 1 is enabled and Level 2 is enabled.
• D. Level 1 is disabled and Level 2 is disabled.

Answer: D

NEW QUESTION # 84
Which two statements ate correct about the BGP next-hop attribute value? (Choose two.)

• A. By default, the next-hop value is changed across IBGP links.
• B. By default, the next-hop value is changed across EBGP links.
• C. By default, the next-hop value is not changed across IBGP links.
• D. By default, the next-hop value is not changed across EBGP links.

Answer: B,C

Explanation:
By default, the router that originally sourced the route into BGP places its peer address into the attribute field. The next-hop value is then typically changed when the route is transmitted across external gGP (EBGP) links. Internal BGP (IBGP) peers do not alter the next-hop value between themselves.

NEW QUESTION # 85
Exhibit

Which prefix in the output shown in the exhibit is an external prefix injected by an OSPF router?

• A. 192.108.1.4
• B. 172.18.1.0/24
• C. 192.168.1.3
• D. 172.26.4.0730

Answer: D

NEW QUESTION # 86
What are three well-known mandatory BGP attributes? (Choose three.)

• A. next hop
• B. AS path
• C. origin
• D. MED
• E. community

Answer: A,B,C

Explanation:
There are four categories of BGP attributes:
Well-known mandatory: Recognized by all BGP peers, passed to all peers, and present in all Update messages. Well-known mandatory attributes include:- Next- hop- Origin- AS PATH Well-known discretionary: Recognized by all routers, passed to all peers, and optionally included in the Update message. Well-known discretionary attributes include:- Local Preference - Atomic Aggregate Optional transitive: Possibly recognized by BGP routers and passed to BGP peers. Optional transitive attributes are marked as partial when not recognized.
Optional transitive attributes include: - Aggregator - Community
Optional non-transitive: Possibly recognized by BGP routers but not passed to peers. Optional non-transitive attributes include:- Multi-exit discriminator (MED) - Originator ID -Cluster-ID

NEW QUESTION # 87
Click the Exhibit button.

In the network shown in the exhibit, all switches are configured with the default STP root bridge priority, and Switch A has been selected as root. You recently added the older Switch D into the network as an access switch, and notice it has taken over as root.
Which configuration would solve this problem?

• A.
• B.
• C.
• D.

Answer: B

Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/no-root-port-edit-protocols-stp.html

NEW QUESTION # 88
Which two interface types are used as tunnel endpoints? (Choose two.)

• A. ip
• B. gr
• C. ge
• D. ae

Answer: A,B

NEW QUESTION # 89
Click the exhibit.

You are asked to enable a new BGP connection on R1, which has an existing IPv4 peering with R2. The new peering with R3 will use IPv6.
Referring to the exhibit, which two steps are required to enable the new IPv6 peering? (Choose two.)

• A. Configure an IPv6 local address under the BGP group.
• B. Configure an IPv6 neighbor address under the BGP group.
• C. Configure the rib inet6.0 statement under the BGP group.
• D. Configure an IPv6 address on the appropriate interface.

Answer: B,D

NEW QUESTION # 90
You notice that the RID of your router is being taken from the address of your management interface.
What could cause this scenario?

• A. The loopback address was configured with a /32 address.
• B. The loopback address was configured under [edit routing-options].
• C. The loopback address was not configured under [edit protocols ospf].
• D. A suitable loopback address was not configured on the router.

Answer: D

NEW QUESTION # 91
......

Juniper JN0-363 (Service Provider Routing and Switching, Specialist (JNCIS-SP)) certification is a globally recognized certification that is designed for IT professionals who specialize in service provider routing and switching technologies. It is particularly beneficial for network engineers, network support professionals, and service provider operations personnel who work with Juniper Networks routers and switches.

 

Accurate & Verified New JN0-363 Answers As Experienced in the Actual Test!: https://www.vce4dumps.com/JN0-363-valid-torrent.html

Valid JN0-363 Test Answers Full-length Practice Certification Exams: https://drive.google.com/open?id=1UxKjN3rkSSTAjYUJJ-B0PB4tnn64tqfS