Ultimate Guide to Prepare HPE6-A66 Certification Exam for HP Certification in 2021

Use Real HPE6-A66 Dumps - HP Correct Answers updated on 2021

NEW QUESTION 26
Which AP mode allows an AP to operate autonomously?

• A. AM
• B. IAP
• C. RAP
• D. OCAP

Answer: D

 

NEW QUESTION 27
A network architect has developed a design for a new Aruba Wi-Fi network that will include a hardware Mobility Master (MM) running the ArubaOS 8 4 operating system that will manage:
* Two clustered 7205 controllers with 300 campus APs
* Two clustered VMC-50 controllers with 75 remote APs
The architect plans on creating user roles, firewall policies, and wireless IPS policies on the controllers as well as implementing AirMatch. What would meet the license requirements for this scenario?

• A. LIC-MM-VA-500. LIC-MC-VA-50 (X2), LIC-AP <x375). PEF (x375). RFP (x375)
• B. LIC-MC-VA-50 (X2), LIC-AP (375), PEF (X375), RFP (X375)
• C. LIC-MC-VA-50 (x1), LIC-AP (300), PEF (X300). RFP (x300)
• D. LIC-MM-VA-50, LIC-MC-VA-50 (X1), LIC-AP (X300), PEF <x300). RFP (x300)

Answer: D

 

NEW QUESTION 28
A customer has some employees that travel to various locations, where these employees will need Wi-Fi access at these locations. Because many of these locations do not have wireless support, the employees will need to carry an AP solution with them. Internet connectivity, if it doesn't exist at these locations, will be provided by a national phone company USB wireless card which will be connected to AP. The wireless solution needs minimal bandwidth, but needs to minimally support 802.1 lac wave 1 devices.
Which Aruba AP wireless solution would meet the needs of these employees most effectively and cost efficiently?

• A. 0
• B. 203R
• C. 1
• D. 303H

Answer: B

 

NEW QUESTION 29
Which must you perform in IRIS to assign a device to a Design Group?

• A. Right-click the device and select Set Design Group
• B. Drag and drop the device into the Site
• C. Drag and drop the device into the Design Group
• D. Right-click the device and select Set Layer Membership

Answer: C

 

NEW QUESTION 30
A network architect plans to implement channel bonding in a new wireless design that involves dense deployment of APs. Which channel width would be optimal for this design?

• A. 40 MHZ
• B. 20 MHz
• C. 60 MHZ
• D. 10MHZ

Answer: C

 

NEW QUESTION 31
Which IRIS option will automatically create a project with a blank preconfigured Site-1 ?

• A. New Express Mode
• B. New Project
• C. New Campus
• D. New Site

Answer: C

 

NEW QUESTION 32
A network designer is documenting the number of physical sites for a customer that is within the scope of a redesign project. When determining the network purpose at each site, on what should the designer focus at each site? (Select two.)

• A. number of users
• B. ceiling height
• C. square footage
• D. number of buildings
• E. types of users and their devices

Answer: B,C

 

NEW QUESTION 33
A customer has a need to track traffic patterns and anomalies on a pair of ArubaOS-CX 8400 series switches. Which technology will the customer need to deploy for these switches?

• A. Network Analysis Engine
• B. Mobility First
• C. 2 CiearPass
• D. NetEdit

Answer: D

 

NEW QUESTION 34
A network architect is doing a site survey for a new wireless design One concern the company has with the old wireless network is coverage. In some cases, APs would lose power and some employees in the network would lose wireless connectivity. The new design needs to prevent this issue from occurring. During the site survey, what are best practices to be followed in regards to the dBm signal level and the power of the AP to ensure adequate wireless coverage and minimal overlap of AP signals for the new design?

• A. AP power at 50% and a measurement of -65 dBM on the measuring device
• B. AP power at 75% and a measurement of -90 dBM on the measuring device
• C. AP power at 75% and a measurement of -80 dBM on the measuring device
• D. AP power at 100% and a measurement of -65 dBM on the measuring device

Answer: D

 

NEW QUESTION 35
Which type of Aruba AP uses its radio as its back-haul connection?

• A. Remote AP (RAP)
• B. Air Monitor (AM)
• C. Mesh Porta
• D. Mesh Point

Answer: C

 

NEW QUESTION 36
A network architect is designing a new Wi-Fi solution for a small university The solution will involve two mobility controllers that will be clustered at the campus core Because students use a lot of video in both the dormitory rooms and in the classrooms, the solution will need to support 50Gbps via link aggregation between the controllers and core switches.
Which solution would most cost-effectively meet this requirement for the campus core?

• A. Aruba 7280 mobility controllers and 5406R switches
• B. Aruba 7220 mobility controllers and 3810M switches
• C. Aruba 7210 mobility controllers and 5406R switches
• D. Aruba 7240XM mobility controllers and 3810M switches

Answer: B

 

NEW QUESTION 37
A company has a warehouse that requires ruggedized APs to provide wireless access The APs need to support these characteristics:
* 2 or more spatial streams
* 802.11 ac and 802.11 n support
Cat 7 Ethernet cabling will be used to connect the APs to POE+ capable switches Link aggregation should be employed between the APs and the Ethernet switches. Which would be the most cost-effective solution that would meet the company's requirements?

• A. AP 365 with integrated omnidirectional antennas
• B. AP 375 with external omnidirectional antennas
• C. AP 510 with external omnidirectional antennas and plastic AP cover
• D. AP 318 with external omnidirectional antennas

Answer: D

 

NEW QUESTION 38
A network architect is redesigning a wireless network. The architect begins by analyzing the number of spatial streams supported by APs of various vendors as well as the wireless devices currently in the network, if the company wants to ensure that new wireless design, including user wireless devices, support Multi-User MIMO (MU-MIMO). which standard or standards must the wireless products support?

• A. Only 802.11ax
• B. Only 802.11ax,802.1lac, and 802.l1n
• C. Only 802.11ax and 8011.ac
• D. Only 802.11ax,802.11ac, 802.11n, and 802.11a

Answer: B

 

NEW QUESTION 39
A company is installing Internet of Things (loT) devices to support a smart and energy-efficient environment for a building, including loT devices for heating and air conditioning, lights, and window shades. loT devices of these types are typically classified as which category of devices?

• A. Nomadic devices
• B. Stationary devices
• C. Somewhat mobile devices (SMD)
• D. Highly mobile devices (HMD)

Answer: A

 

NEW QUESTION 40
When determining a customer's agenda and clarifying their expectations for a new HPE/Aruba deployment, which two questions should be asked during the stakeholder checklist? (Select two.)

• A. What is the networking experience of onsite personnel?
• B. What business problems are you trying to solve?
• C. Which help desk system is deployed?
• D. What is your anticipated growth of the environment?
• E. is a request for proposal or actual bill of materials (BOM) required?

Answer: B,E

 

NEW QUESTION 41
A university department has a program in video processing and editing. Students in the department use Wi-Fi to interact with the video servers. The editing and processing is done by the students accessing and using the video servers. However, the students must then stream their results, via Wi-Fi to their laptops to verify the results. A network architect has determined that no more than 20 APs will be needed for the Wi-Fi solution. Because of the large amount of bandwidth used during the streaming, the Aruba mobility controller solution will need to support 10 Gbps links.
Which solution would cost-effectively meet this customer's requirements?

• A. 0
• B. 1
• C. 7240XM
• D. 2

Answer: D

 

NEW QUESTION 42
A customer is designing a new wired network. The customer requires 50 Gbps uplinks, VSF logical switching, and smart rate port support Which of the following switches would meet these requirements?

• A. 5400R series
• B. 3810M series
• C. 8300 series
• D. 6300 series

Answer: B

 

NEW QUESTION 43
A network architect is designing a Wi-Fi solution for a customer using Aruba Central's VisualRF tool When creating a Campus view, how would the network architect pull in a map that displayed the campus location in a city?

• A. Import the longitude and latitude information from Google Maps
• B. Create a screen capture from any web-based map site and import the picture file
• C. Import the longitude and latitude information from any web-based map site
• D. Use VisualRF's built-in map tool and define the appropriate longitude and latitude information

Answer: C

 

NEW QUESTION 44
A network architect is given the task to design a new network solution for NewStellar Company, Inc. NewSteiiar has a main corporate campus in a business park with two adjacent buildings. The network architect has given one floor to analyze, Building 1 Floor 2, shown in the attached exhibit.

Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total, which results in a total of 338,100 feet (31,410 square meters) for the entire building space. Each floor has a central main corridor with washrooms, stairs, elevators and supply and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet {870 square meters).
Because of security concerns, video cameras will be installed throughout the facility. There are 16 of these per floor, 8 per wiring closet. The cameras are non-WiFi capable and require POE 802.3af-capable switch ports from which to draw power.
A wireless capacity design is required. Assuming that wireless coverage is required across the Building 1, Floor 2, including the central area, and that half the required APs will connect to each wiring closet, approximately how many POE+ ports will be required per wiring closet for all devices that have POE or POE+ needs?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: C

 

NEW QUESTION 45
A network architect is creating a new wired design for a warehouse building. As a best practice, what length should the architect allow for the service loop in the wiring closets in this environment?

• A. 3-10 feet (1-3 m)
• B. 3 feet (1 m)
• C. 30-60 feet (10-20 m)
• D. 15-30 feet (5-10 m)

Answer: B

 

NEW QUESTION 46
......

HP Certification -HPE6-A66 Exam-Practice-Dumps: https://www.vce4dumps.com/HPE6-A66-valid-torrent.html

HPE6-A66 Premium Files Test pdf - Free Dumps Collection: https://drive.google.com/open?id=1v4aHZLeXAR25XPQrwhGOCeB3tLpbERLf