Top Salesforce OmniStudio-Developer Courses Online - Updated [Nov-2021]

OmniStudio-Developer Practice Dumps - Verified By VCE4Dumps Updated 63 Questions

Salesforce OmniStudio-Developer Exam Syllabus Topics:

Topic	Details
Topic 1	Given a use case, compare and contrast various elements and their configuration Apply concepts required to build the JSON data structure that supports FlexCards framework
Topic 2	Demonstrate an understanding of the mechanics of a Calculation Procedure Demonstrate an understanding of the JSON data structure that supports OmniScript
Topic 3	Determine which DataRaptor Turbo Extract functionality is needed Determine which DataRaptor Load functionality is needed
Topic 4	Given a use case, compare and contrast various elements and their configuration Determine which DataRaptor Extract functionality is needed
Topic 5	Given a customer issue, determine the breakdown location in the data flow Identify which DataRaptor to use to meet a requirement
Topic 6	Demonstrate an understanding of the mechanics of a Calculation Matrix Given a set of requirements, determine appropriate card style, data sources, fields

 

NEW QUESTION 22
Refer to the exhibit.
What JSON from the DRGetAccountDetails action would display all six values correctly in the OmniScript structure shown? BlkContacts is a Repeat Block.

A)

B)

C)

D)

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: C

 

NEW QUESTION 23
Refer to the exhibit.

A developer has configured an integration Procedure element with SEND/RESPONSE TRANFORMATIONS as shown.
Alternatively, how could the developer configure Additional input to send exactly the same data? Assume that the developer checked Send Only Additional input.
A)

B)

C)

• A. Option A
• B. Option B
• C. Option C

Answer: C

 

NEW QUESTION 24
You are configuring the API URL in an HTTP Action element within an Integration Procedure.
What is the merge code syntax for passing a Date node from an element named SetValues in the URL?

• A. [SetValues' [Date] on
• B. {{SetValues. Date} Calculator
• C. %Setvalues.Date%
• D. %SetValues:Date%

Answer: D

 

NEW QUESTION 25
Why would a developer clone an Integration Procedure instead of versioning it?

• A. The new Integration Procedure will be used independently
• B. The new Integration Procedure is Chainable.
• C. The new Integration Procedure uses a Cache Block.
• D. The new Integration Procedure it replacing stub data.

Answer: A

 

NEW QUESTION 26
Refer to the following row-versioned calculation matrix.

The developer needs to delete the row that contains the Code CA-SF.
If the developer deletes that row in Version 3, what is the result?

• A. The row is deleted in Version 3 and Version 1.
• B. The row is deleted In Versions 2 and 3 but will remain in Version 1.
• C. The row is deleted in all versions
• D. The row is delete only in Version 3.

Answer: D

 

NEW QUESTION 27
What is the reason for this? Refer to the exhibit below.

• A. The flag passData.JSON in the parent OmniScript in not configured correctly.
• B. The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.
• C. Both parent and embedded OmniScripts have the same element name for the Set Values element.
• D. A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.

Answer: D

 

NEW QUESTION 28
A customer sets up to LWC Omniscripts, one embedded into another. Account is set in a Set Values element in the parent Omniscript.
The AccountId set in the parent Omniscriptis used to another Set Values element ContextAccountid in the embedded OmniScript. The embedded Omniscript is activated.
While previewing the OmniScript flow from the parent, it is found that Account is set correctly in the parent OmniScript. However. ContextAccountId in the embedded OmniScript is not set with the AccountId from parent Omniscript. On previewing the embedded OmniScript individually, it is found that ContextAccountId is set correctly.
What is the reason for this? Refer to the exhibit below.

• A. Both parent and embedded OmniScripts have the same element name for the Set values element.
• B. A developer failed to include a Navigation Element to pass data from the parent OmniScript.
• C. The LWC PubSub Message flag in the Set Values action of theparent has not been set.
• D. The flag passDataJSON in the parent OmniScript in not configured correctly.

Answer: C

 

NEW QUESTION 29
You are building a DataRaptor Load for an Integration Procedure used in an OmniScript.
Based on best practices, how should you configure the Input JSON?

• A. Build the Input JSON node by node in the DataRaptor Designer.
• B. Copy the Input JSON from the OmniScript {Data} modal.
• C. Build the Input JSON node by node in an editor.
• D. Copy the Input JSON from the DataRaptor Action Debug node.

Answer: B

 

NEW QUESTION 30
You are configuring an Integration Procedure Action in an OmniScript. The OmniScript needs a JSON response from the Integration Procedure, but you do not want to wait for the response for the user to proceed.
What feature do you enable?

• A. Use Future
• B. Invoke Mode Non-Blocking
• C. Invoke Mode Fire and Forget
• D. Toast Completion

Answer: D

 

NEW QUESTION 31
What pre-populates the data in a PDF used by an OmniScript?

• A. ADataRaptor Extract
• B. A DataRaptor Transform
• C. ADataRaptor Load
• D. ASOGL Query

Answer: B

 

NEW QUESTION 32
A developer needs to create a list of cases for an account in a single Datable in a FlexCard. Like the one shown below.

How can the developerconfigure the FlexCard to display the case records in this way?

• A. Enable the Repeat Records feature on the FlexCard Setup tab
• B. Enable the record Looping feature on the data table elements
• C. Select the Repeatable Mode property on the data table elements
• D. Disable the Repeat Record feature on the FlexCard setup tab

Answer: D

 

NEW QUESTION 33
A developer is configuring a DataRaptor Load to Save contract dat
a. The developer needs to set the record type of the contact using DeveloperName.
Which two configuration actions should the developer take to set this up in the DataRaptor Load?

• A. Add Link to RecordType object in the Contact Object with the id field of RecordType object.
• B. Select RecordType in the Lookup object list. Development in the lookup Field list, and ID in the Lookup Requested Field list.
• C. Check is Lookup property when mapping the fields.
• D. Select RecordType in the Lookup Object list. ID in the Lookup Field list, and Development in the Lookup requested Field list.

Answer: B,C

 

NEW QUESTION 34
Which twoof the items below must be defined before you can create a new OmniScript? Choose 2 answers

• A. Description
• B. SubType
• C. Template
• D. Type

Answer: B,D

 

NEW QUESTION 35
An integration procedure contains a Remote Action element that calls a method of an APEX class. The method requires two fields are input: Accountid and ProductId. The integration Procedure data JSON contains the following nodes:
How should the Remote Action element be configured to pass the data correctly to the method?

• A. Set Return Only Additional Output to true, and add the following Key/Value pairs to additional input.
  
• B. Check the Send Only Additional Input checkbox, and the following/ value pairs to Additional input:
  
• C. Add the following to Send JSON Path: accountId: %Accountd% ProductId% Details Products%
• D. Check the DataRaptor Transform checkbox, and add the following Key/Value pairs to Output JSON Path:
  

Answer: A

 

NEW QUESTION 36
The OmniScript must retrieve device details stored in the Asset object and then call an external system to send troubleshooting commands via REST API to the device.
Which two OmniScript element should the developer use to configure this functionality?

• A. DataRaptor Extract Action
• B. Navigation Action
• C. HTTP Action
• D. REST API Action
• E. SOQL Action

Answer: A,C

 

NEW QUESTION 37
A developer has an existing DataRaptor Load that insert Contact records with inputs as LastName and firstName. The DataRaptor works as expected when previewed.
The developer creates an integration Procedure to test the DataRaptor and is using a SetValues element in the Integration Procedure to set the first name and last name for the contact record. The DataRaptor and Integration Procedure are set up as shown in the exhibit below.

When the developer executes the Integration procedure in preview, the following error message displays: Required fields are missing: [last Name]'', How should the developer address this issue?

• A. SetValuesContactDetails should have been added to Additional input of DataRaptor Post Action in Integration Procedure
• B. The valid field names should be added in the Domain object field in the DataRaptor
• C. The Set values Action Keys should include the DataRaptor Post Action element name path, e,g LoadContactDetails, lastname
• D. The DataRaptor Post Action in the integration procedure should have been executed before the Set Values Action

Answer: A

 

NEW QUESTION 38
What parent JSON node name must be sent to a Calculation Procedure?

• A. Inputs
• B. Input
• C. inputs
• D. input

Answer: C

 

NEW QUESTION 39
......

New (2021) Salesforce OmniStudio-Developer  Exam Dumps: https://www.vce4dumps.com/OmniStudio-Developer-valid-torrent.html

Updated OmniStudio-Developer  Exam Dumps - PDF Questions and Testing Engine: https://drive.google.com/open?id=1VZhezetRG-p7b1BotSfbjw8wS2jDjj2E