Latest [Jan 20, 2022] Veeam VMCE2020 Real Exam Dumps PDF

VMCE2020 Practice Test Questions Updated 50 Questions

NEW QUESTION 26
If you need to run a script to stop a service in order to get an application-consistent backup on a Windows server, where can the script be run?

• A. Configure the script to run on the Veeam Backup & Replication server using the Windows Task Scheduler
• B. In the virtual machines setting of the job, add a script in the scripts tab under "Run the following script before the job:"
• C. In the guest processing setting of the job, enable application-aware processing and add a pre-freeze script to the VM
• D. Copy the script to the VM and schedule the script to run prior to the start of the backup job using the Windows Task Scheduler in the VM

Answer: C

 

NEW QUESTION 27
The backup administrator configured replication for a VM from Data Center 1 to Data Center 2, which runs every day at 1 a.m. A power surge takes out Data Center 1 at 7 a.m. and the administrator fails over the replica at 8 a.m. When the power comes back on, the administrator performs the "failback" action at 2 p.m.
and checks the state of the original VM. They recognize that not all data is available. What is missing?

• A. Data from 7 a.m. to 8 a.m.
• B. Data from 1 a.m. to 2 p.m.
• C. Data from 8 a.m. to 2 p.m.
• D. Data from 1 a.m. to 7 a.m.

Answer: B

 

NEW QUESTION 28
A backup administrator is planning to install Veeam ONE. Which data collection mode collects the most data per VM?

• A. Optimized for typical deployment
• B. Optimized for advanced scalability deployment
• C. For backup data only
• D. For vCenter data only

Answer: B

 

NEW QUESTION 29
Which Veeam Backup & Replication job type offers the shortest recovery time objective (RTO)?

• A. Replication
• B. Backup copy
• C. Backup to tape
• D. File to tape

Answer: A

 

NEW QUESTION 30
When a replication job is configured to use the replica mapping feature (no seeding), what will happen during the first run of the job?

• A. The replication job calculates the differences between the original and mapped VM; only the incremental changes will be synchronized
• B. The replication job will first restore the VM from the most recent restore point and then start to synchronize the incremental changes from the source infrastructure
• C. The replication job creates a clone of the mapped replica to preserve the original state before synchronizing the changes from the source infrastructure
• D. If a VM within the replication job is not mapped, the job will fail

Answer: A

 

NEW QUESTION 31
A backup administrator is creating a SureBackup environment up using Hyper-V as the hypervisor. Which virtual labs are available for Hyper-V? (Choose two.)

• A. Advanced single-host (manual configuration)
• B. Basic single-host (automatic configuration)
• C. Advanced multi-host (automatic configuration)
• D. Advanced multi-host (manual configuration)
• E. Advanced single-host (automatic configuration)

Answer: B,C

 

NEW QUESTION 32
When deploying an advanced single-host virtual lab in a VMware environment, what will Veeam create?

• A. A distributed virtual switch without uplink(s)
• B. A distributed virtual switch with uplink(s)
• C. A standard virtual switch with uplink(s)
• D. A standard virtual switch without uplink(s)

Answer: C

 

NEW QUESTION 33
A backup administrator is deploying a Veeam ONE environment. They have chosen to use separate servers from their Veeam Backup & Replication environment. What benefit will they receive if they install the Veeam ONE Agent onto their backup server?

• A. Track whether VMs and agents are properly protected and following the 3-2-1 rule
• B. Collect Veeam Backup & Replication logs and execute remediation actions
• C. Analyze Veeam Backup & Replication log data and retrieve signature updates
• D. Collect virtual environment configuration from Veeam Backup & Replication

Answer: D

 

NEW QUESTION 34
A company has separate networks for management traffic and data traffic. All Veeam components are communicating over the management network. How would they define the data network for backup data transfers?

• A. Re-add all Veeam components involved in data transfer through the required interfaces
• B. Update routing tables on the components involved in data transfer
• C. Create a global network traffic rule, set appropriate source and target IP range
• D. Use the preferred network settings to switch to data network for the backup traffic

Answer: C

 

NEW QUESTION 35
Which storage optimization option uses a block size of 512 KB?

• A. LAN target
• B. Local target
• C. Local target (large blocks)
• D. WAN target

Answer: A

 

NEW QUESTION 36
When you back up regular or standalone VMs in vCloud Director, which of the following is captured and stored in Veeam's Backup & Replication backup file? (Choose three.)

• A. VM metadata
• B. VM disk content
• C. Linked clone VM's prior to vCenter 6.5
• D. Raw device mapping
• E. vApp metadata
• F. In-guest iSCSI disk

Answer: A,B,E

 

NEW QUESTION 37
A backup administrator is creating a SureBackup environment up using Hyper-V as the hypervisor. Which virtual labs are available for Hyper-V? (Choose two.)

• A. Advanced single-host (manual configuration)
• B. Basic single-host (automatic configuration)
• C. Advanced multi-host (automatic configuration)
• D. Advanced multi-host (manual configuration)
• E. Advanced single-host (automatic configuration)

Answer: B,C

Explanation:
Explanation/Reference: https://helpcenter.veeam.com/docs/backup/hyperv/surebackup_basic_vlab.html?ver=100

 

NEW QUESTION 38
What are the three Veeam Backup & Replication technologies required to verify recoverability of the backup?
(Choose three.)

• A. Virtual lab
• B. Backup proxy
• C. Application group
• D. SureBackup job
• E. Gateway Server
• F. Replication job

Answer: A,C,D

 

NEW QUESTION 39
Which backup method produces a backup chain that consists of the first full backup file (VBK) and a set of incremental backup files (VIB) following it? Additionally, the backup chain contains synthetic full and/or active full backup files that divide the backup chain into shorter series.

• A. Forever forward incremental backup
• B. Reverse incremental backup
• C. Differential incremental backup
• D. Forward incremental backup

Answer: D

 

NEW QUESTION 40
A backup administrator needs to restore two data drives to a VM where the operating system remains intact. The target machine must remain powered on. What recovery option is most appropriate to perform this operation?

• A. Instant VM Recovery
• B. Restore VM files
• C. Restore entire VM
• D. Instant disk recovery

Answer: D

Explanation:
Explanation/Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/instant_disk_recovery.html?ver=100

 

NEW QUESTION 41
Which of the following predefined tests can be performed during a SureBackup verification test on a backup file? (Choose three.)

• A. SAN check
• B. Boot time
• C. Application test
• D. OS test
• E. Ping test
• F. Heartbeat test

Answer: C,E,F

 

NEW QUESTION 42
Which of the following scenarios properly applies the 3-2-1 rule to backup jobs?

• A. Use backup jobs to back up directly to tape; ship the tapes off site
• B. Use a backup job to back up to a local repository; perform a backup copy job to a repository in another location
• C. Use a backup job to back up to a Scale-out Backup Repository configured with capacity tier using AWS S3 and enable move mode
• D. Use a backup job to back up to a local repository; perform a backup copy job to the same repository

Answer: D

 

NEW QUESTION 43
A company has been running off replicated, business-critical VMs at their disaster recovery location since an earthquake near the primary data center occurred. Since the threat has passed, they want to stop the replicas and switch to the VMs at the primary data center without losing data. Which of the following actions is the first step they should take?

• A. Permanent failover
• B. Commit failback
• C. Failback to production
• D. Undo failover
• E. Planned failover
• F. Failover

Answer: B

 

NEW QUESTION 44
When planning to back up files and folders from shared sources, that is the correct method to connect to the file share from the Veeam backup server?

• A. Add the file share into the managed servers
• B. Add the file share into the store infrastructure
• C. Add the file share into the physical infrastructure
• D. Add the file share into the inventory

Answer: A

 

NEW QUESTION 45
In the event a VMware VM configuration file (VMX) is missing and a restore is needed, what Veeam restore process is the best choice for this situation?

• A. VM file restore
• B. Instant VM recovery
• C. Instant disk recovery
• D. Virtual disk restore

Answer: A

 

NEW QUESTION 46
A virtual machine in your environment has been hit by a virus. You need to restore the virtual machine as fast as possible. At the same time, you need to make sure that any dormant virus on the backed up virtual machine is detected. What restore method should you use when recovering to a new location?

• A. Instant VM Recovery with "secure restore"
• B. Instant VM Recovery with "staged restore"
• C. SureBackup
• D. Virtual disk restore

Answer: A

Explanation:
Explanation/Reference: https://helpcenter.veeam.com/docs/backup/em/em_disk_restore.html?ver=100

 

NEW QUESTION 47
A company is required to have a daily backup with a retention of at least six weeks. The backups are running every eight hours during the day. From the options provided, what backup job would you advise based on their SLA and best practices?

• A. Forward incremental backup with weekly synthetic full backups and a retention of 42 days
• B. Forever forward incremental backup, with a retention of 42 restore points
• C. Forever forward incremental backup, with default job settings enabled
• D. Forever forward incremental backup, with a retention of 42 restore points, savings six weekly full backups

Answer: A

 

NEW QUESTION 48
A customer has a physical proxy configured for Direct Storage Access without failover to network mode. The backup fails. What could be the issue?

• A. The storage is not added into the storage infrastructure, inside the backup and replication console
• B. Write access has not been enabled on the SAN
• C. The datastores are properly zoned and exposed to the proxy server but in read-only mode
• D. One or more of the VM disk(s) are on Wols
• E. The disks being processed are IDE and/or SATA

Answer: D

 

NEW QUESTION 49
Veeam is used for replicating VMware VMs. The production environment is comprised of two networks:
192.168.1.0/24 and 172.16.0.0/16. A web application requires a database server (whose IP address is
172.21.0.12) to receive queries from a web client (whose IP address is 192.168.1.32). The replicas are spread over multiple hosts. A backup administrator needs to configure a virtual lab to test a web client to database server query. Which of the following virtual lab types must be configured?

• A. Basic single-host
• B. Advanced single-host
• C. All virtual lab configurations would support that
• D. Advanced multi-host

Answer: B

 

NEW QUESTION 50
......

Before applying for the course, some prerequisites have to be satisfied by the attendees. These include a solid awareness of storage, servers, networking, as well as virtualization. Once fulfilled them, the candidates will go through the content that involves the parts such as introduction, building the capabilities for backup, restoration from backup, backing up copy jobs, replication, and failover. More areas include advanced repository abilities, testing of backup in addition to replication, Veeam ONE, Veeam backup enterprise manager, and support. As you come to the end of the training, here is what you should have attained:

• Abilities in the installation and configuration of the Availability Suite
• Proficiency in ensuring the possibility of recovery as well as its effectiveness, efficiency, security, and compliance with legal and business requirements
• Ability to provide visibility when it comes to data assets for business, producing effective reports, as well as dashboards for the monitoring of performance in addition to risks
• Skills in adapting the evolving needs of an organization that include business, technical, and regulatory ones
• Effective management of data availability within off-site, on-site, cloud, as well as a hybrid environment
• Awareness concerning components for Veeam’s Availability Suite, their usage instances, and how relevant they are to their environment
• Effectiveness in conducting basic troubleshooting as well as analysis of the environment regarding the Availability Suite
• Competencies in ensuring the meeting of both RTOs as well as RPOs

 

Veeam VMCE2020 Dumps - Secret To Pass in First Attempt: https://www.vce4dumps.com/VMCE2020-valid-torrent.html