DES-3128 Dumps (2023) Prepare Your Exam With 62 Questions
New DES-3128 Dumps - Real EMC Exam Questions
NEW QUESTION 17
An administrator is configuring backups on a client that requires the use of a directive.
Which application-specific module should be specified to ensure specific files are saved regardless of the backup level?
- A. rawasm
- B. swapasm
- C. always
- D. AES
Answer: C
NEW QUESTION 18
An administrator wants to create a client "ABO" to back up alt critical volumes for disaster recovery. They want the backup utility to scan a volume or a disk m a file system and back up all the blocks that are in use in the file system Also, the user has a feature that allows for a single high-density file system to be spirt into multiple concurrent save sets to speed up the backup walk process. The client must send 6 save sets simultaneously in a backup.
Use the simulator to perform the task
When you have finished, continue to the next question.
Answer:
Explanation:
Send the feedback for this answer.
NEW QUESTION 19
Which URL syntax is correct for NWUI?
- A. https//servemame 9090
- B. https//servemame 9090/webui
- C. https //servemame 9090/nwui
- D. https//servemame 9090/ui
Answer: B
Explanation:
NWUI, or NetWorker User Interface, is a web-based graphical user interface for NetWorker. The URL syntax for NWUI is https://servername:9090/webui, where "servername" is the name of the NetWorker server.
NEW QUESTION 20
A NetWorker workflow is configured as a probe-based backup
What actions must be included in the workflow?
- A. clone and probe and action only
- B. check connectivity and probe actions
- C. internal and metadata validation
- D. probe and backup actions
Answer: D
Explanation:
A probe-based backup workflow must include the probe and backup actions. The workflow will first probe the client to determine the data sets that need to be backed up and then perform the actual backup process.
NEW QUESTION 21
What cloud solution is designed for situations where workloads are running entirely in the cloud?
- A. Backup from within the Cloud
- B. Infrastructure-as-a-Service
- C. Backup to the Cloud
- D. Replication to the Cloud
Answer: B
Explanation:
Infrastructure-as-a-Service (IaaS) is a cloud solution designed for situations where workloads are running entirely in the cloud. IaaS provides users with access to virtualized computing resources, such as storage, networking, and computing power, through a cloud provider.
NEW QUESTION 22
A NetWorker server has a PowerProtect DDVE attached It is running out of space, and a customer needs to offload some data to AWS S3 What is the recommended way to perform this?
- A. Utilize a Dell EMC Cloud Tier feature.
- B. Deploy a NetWorker storage node in AWS.
- C. Deploy a NetWorker storage node in AWS.
- D. Manually copy data to AWS S3
Answer: D
NEW QUESTION 23
An administrator wants to use block-based backups on a Windows client. They have already installed the NetWorker client software package on the system Which statement describes the need for an additional NetWorker package to enable Block-based Backup support?
- A. NetWorker Extended Client software is required.
- B. No additional software is required.
- C. NetWorker Block-based Backup software is required.
- D. Logical Volume Manager is required.
Answer: C
NEW QUESTION 24
A NetWorker server is utilizing a remote storage node. There is a PowerProtect DD appliance with two VTLs configured, and it is attached to the storage node via Fiber Channel. There is also a physical media library attached to the same storage node.
How many nsrlcpd processes are running on the storage node?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 25
By default, which NetWorker server policy and workflow back up the CFI?
- A. Server Protection policy and Server backup workflow
- B. Gold policy and Server backup workflow
- C. Silver policy and NMC Server backup workflow
- D. Server Protection policy and NMC Server backup workflow
Answer: A
Explanation:
By default, the Server Protection policy and Server backup workflow are used to back up the CFI (Client File Index) on the NetWorker server.
NEW QUESTION 26
A customer has installed a new PowerProcted DO series appliance named DD0. The DD Boost user name is ddboost and the password is abc123. A single DD Boost device named DD01.SU01 labeled to DO.VMware_Pool is needed Use the simulator to create the desired configuration When you have finished, continue to the next question.
Answer:
Explanation:
To create the desired configuration, you will need to use the Data Domain CLI (Command Line Interface) to access the DD Boost device and create the new appliance. Here are the steps:
Log in to the Data Domain CLI by entering the following command:
ssh ddboost@DD0
Enter the password "abc123" when prompted.
Once logged in, create a new DD Boost device named DD01.SU01 by entering the following command:
ddboost device create --name DD01.SU01 --type vmware --pool DO.VMware_Pool Verify that the new device has been created by running the following command:
ddboost device show --name DD01.SU01
Configure the DD Boost device to connect to the PowerProcted DO series appliance by running the following command:
ddboost device set --name DD01.SU01 --dd-host DD0
Verify the configuration by running the following command:
ddboost device show --name DD01.SU01
NEW QUESTION 27
An administrator wants to make sure Oracle backups only use a specific storage node.
Use the simulator to configure an AFTD Device on "StorageNodeA" with the name "OracleBackup" using the folder "D \AFTD" to the pool "Default". This storage node should be a dedicated storage node
When you have finished, continue to the next question.
Answer:
Explanation:
To configure an AFTD device on "StorageNodeA" with the name "OracleBackup" using the folder "D:\AFTD" to the pool "Default", the administrator can use the Data Domain CLI (Command Line Interface) to access the Data Domain system and create the AFTD device. Here are the steps:
Log in to the Data Domain CLI by entering the following command:
ssh admin@StorageNodeA
Once logged in, create a new AFTD device named "OracleBackup" by entering the following command:
ddboost afd create --name OracleBackup --pool Default --folder D:\AFTD
Verify that the new AFTD device has been created by running the following command:
ddboost afd show --name OracleBackup
To make sure that the Oracle backups only use the specific storage node, you can assign the AFTD device to the Oracle backup host by running the following command:
ddboost afd set --name OracleBackup --host OracleBackupHost
Verify the configuration by running the following command:
ddboost afd show --name OracleBackup
To make sure that the StorageNodeA is a dedicated storage node, you can configure the storage node to only allow the OracleBackup host to use the AFTD device by running the following command:
ddboost host access add --host OracleBackupHost --afd OracleBackup
Finally, the administrator should select the "Apply" button to save the configuration.
NEW QUESTION 28
What is staging used for?
- A. make and keep a second copy at all times
- B. move data to a different storage device
- C. keep both copies online at all times
- D. maintain a longer retention period
Answer: A
Explanation:
Staging is used to make and keep a second copy of data at all times. This process is used to ensure data redundancy and provide additional protection against data loss or corruption.
NEW QUESTION 29
What resource does NetWorker use to protect VMware objects, save sets, or clients?
- A. Protection Group
- B. Actions
- C. Workflows
- D. Data Protection Policy
Answer: A
Explanation:
NetWorker uses Protection Groups to protect VMware objects, save sets, or clients. Protection Groups allow you to group related objects together, making it easier to manage and run backups.
NEW QUESTION 30
Refer to the exhibit.
An administrator asks about the clone flag on the Cloud. What does the T flag represent?
- A. Save set exists only on the cloud storage
- B. Save set exists only on a Cloud Tier device
- C. Save set will be terminated at the cloud provider
- D. Save set will be cloned to a tape device
Answer: B
NEW QUESTION 31
A customer asked an administrator to configure Active Directory (AD) granular level backups A backup administrator discovered that the AD Domain distinguished name is CN=company,CN=local What should be entered in the Save Sets attribute for the Domain Controller client to back up the Active Directory?
- A. APPLICATIONS/AD/CN=company,CN=local
- B. CN=companyCN=local
- C. AD:CN=company.CN=local
Answer: A
NEW QUESTION 32
A backup administrator wants to use an mminfo utility to run a query for several save sets from a NetWorker client running Windows 2019 However, they receive an error that the mminfo executable is not found.
What is the fastest way to resolve this issue?
- A. Open a case with Dell Support
- B. Use an nsrinfo utility instead
- C. Use a Windows Explorer to find the mminfo.exe file
- D. Install the NetWorker Extended Client package.
Answer: D
NEW QUESTION 33
A customer checks the rap log on a NetWorker server to audit recent resource changes, but the file is empty.
What is the cause of the issue?
- A. Permission issues for the log are not set.
- B. The Monitor RAP attribute on a NetWorker Client is disabled.
- C. The Monitor RAP attribute on a NetWorker Server is disabled.
- D. Permission issues for the log are set.
Answer: C
NEW QUESTION 34
......
Get Ready with DES-3128 Exam Dumps: https://www.vce4dumps.com/DES-3128-valid-torrent.html
Dependable DES-3128 Exam Dumps to Become EMC Certified: https://drive.google.com/open?id=15Lf9K6iSl6RkrzvwqkZB3d4FHhkiYSzd