[Aug 11, 2022] Free PDI+ PD1-001 Exam Question
PD1-001 dumps & PDI+ sure practice dumps
NEW QUESTION 101
TWAIN compliant scanning devices also require which of the fol owing in order to enable communication to a workstation?
- A. A device specific driver
- B. An Ethernet network connection
- C. A static IP address
- D. An image editing application
Answer: A
NEW QUESTION 102
Which of the following copy defects would result from the scanner carriage being out of alignment and not being parallel to the left scale?
- A. Overall light copy quality
- B. Image edges wil resemble a parallelogram
- C. Overall image wil be skewed
- D. Overall dark copy quality
Answer: B
NEW QUESTION 103
Which of the fol owing components can be used to remove residual charge from the photoconductor prior to charging? (Select TWO).
- A. Fuser unit
- B. Developer unit
- C. Cleaning blade
- D. Erase LEDs
- E. Charge roller
Answer: D,E
NEW QUESTION 104
Which of the following components contains multiple rollers for transporting originals?
- A. Platen glass
- B. ADF
- C. Flatbed scanner
- D. CCD
Answer: B
NEW QUESTION 105
A customer calls the support line and explains to the technician that every time they make a copy on their color laser MFD, the page is all black. Which of the following should the technician ask the customer to do next?
- A. Recalibrate the print engine.
- B. Reinitialize the scanner unit.
- C. Clean the photoconductor.
- D. Print an internal test page.
Answer: D
NEW QUESTION 106
During the image capture process, an exposure lamp is used to:
- A. darken the light areas of the document image.
- B. warm up the document image to facilitate capturing it.
- C. reduce the size of the document image.
- D. illuminate the document to read the reflected light.
Answer: D
NEW QUESTION 107
When combining all colors 100% in the subtractive color model, which of the following is the closest resulting color?
- A. Blue
- B. Black
- C. Cyan
- D. Red
Answer: B
NEW QUESTION 108
Which of the following is a correct statement regarding ozone filters?
- A. Should be replaced as scheduled
- B. Should be cleaned using an air tool
- C. Should be cleaned using ozone cleaning fluid
- D. Should be cleaned using water
Answer: A
NEW QUESTION 109
While printing from a computer or receiving a fax, a customer notices a line down the page. Which of the following is a possible cause of the problem?
- A. Photoconductor
- B. Contaminated CCD
- C. Network connection
- D. Transmission speed setting
Answer: A
NEW QUESTION 110
At which of the following stages of the laser/LED printing process is the toner bonded to the media?
- A. Transferring
- B. Fusing
- C. Developing
- D. Writing
Answer: B
NEW QUESTION 111
A print driver is a/an:
- A. electronic component used on a circuit board.
- B. mechanical component used to update firmware.
- C. piece of software that tells a PC what features are available on a printer.
- D. piece of hardware that enables communication between a PC and a printer.
Answer: C
NEW QUESTION 112
Which of the following are types of sensors? (Select TWO).
- A. Reflective
- B. Motorized
- C. Resistive
- D. Interrupter
- E. Stepper
Answer: A,D
NEW QUESTION 113
Which of the following components temporarily carries the latent image?
- A. Developer
- B. Photoconductor
- C. Charge roller
- D. Laser Unit
Answer: B
NEW QUESTION 114
Which of the following components wil tend to slip or not properly engage if it becomes damaged?
- A. Magnetic switch
- B. Sensor
- C. Relay
- D. Clutch
Answer: D
NEW QUESTION 115
Which of the following color models is used by PC monitors to create colors?
- A. CMYK
- B. PCL
- C. Subtractive
- D. RGB
Answer: D
NEW QUESTION 116
When using a multimeter to check for continuity, which of the following settings should the multimeter be set to?
- A. DC Volts
- B. Ohms
- C. Amps
- D. AC Volts
Answer: B
NEW QUESTION 117
Which of the following components are found in the fuser unit? (Select TWO).
- A. Developer roller
- B. Heating roller
- C. Charge roller
- D. Transfer roller
- E. Pressure roller
Answer: B,E
NEW QUESTION 118
A user knows the TCP/IP address for a network printer but is unable to locate the printer on the network. Which command can the user send to test the network cable connection?
- A. IPCONFIG
- B. PING
- C. GETIP
- D. IPFIND
Answer: B
NEW QUESTION 119
When onsite repairing a printer the technicians cell phone rings and it is a personal call, how should the technician handle this?
- A. Answer the call and talk to your friend at the customer site.
- B. Let it go to voicemail, call them back between service calls.
- C. Let it ring and call the friend back when the customer leaves.
- D. Answer the call and tell the friend you wil call them later.
Answer: B
NEW QUESTION 120
When scanning a photo, the process of sharpening wil increase the:
- A. contrast.
- B. size of the file.
- C. color reproduction.
- D. compression.
Answer: A
NEW QUESTION 121
Which of the following adjustments should the technician make to produce a gray with less red in it?
- A. Increase blue and reduce yellow in the color balance.
- B. Increase black and reduce yellow in the color balance.
- C. Reduce magenta and yellow in the color balance.
- D. Reduce magenta and cyan in the color balance.
Answer: C
NEW QUESTION 122
Which of the fol owing components are used to create the latent image on the photoconductor?
(Select TWO).
- A. Developer
- B. Laser
- C. Light Emitting Diode (LED)
- D. Transfer roller
- E. Charge Couple Device (CCD)
Answer: B,C
NEW QUESTION 123
Which of the following components is used to send paper to the duplex unit rather than the paper output unit?
- A. Fuser unit
- B. Paper feed unit
- C. Transfer roller
- D. Junction gate
Answer: D
NEW QUESTION 124
Special care must be taken when handling fuser assemblies because they:
- A. produce ozone.
- B. are sensitive to light.
- C. are statically charged.
- D. can cause burns.
Answer: D
NEW QUESTION 125
Firmware may need to be updated on an MFD because:
- A. print drivers need to be enhanced.
- B. an end user has used the device incorrectly.
- C. the device may not be functioning correctly.
- D. the quality of scans has degraded over time.
Answer: C
NEW QUESTION 126
......
CompTIA PD1-001 Actual Questions and Braindumps: https://www.vce4dumps.com/PD1-001-valid-torrent.html