[2024] Pass your NSE6_FAZ-7.2 exam with this 100% Free NSE6_FAZ-7.2 Braindump

View All NSE6_FAZ-7.2 Actual Exam Questions, Answers and Explanations for Free

NEW QUESTION # 15
What is the best approach to handle a hard disk failure on a FortiAnalyzer that supports hardware RAID?

• A. Shul down FortiAnalyzer and replace the disk.
• B. Run execute format disk to format and restart the FortiAnalyzer device.
• C. Perform a hot swap of the disk.
• D. There is no need to do anything because the disk will self-recover.

Answer: C

Explanation:
In systems that support hardware RAID, hot swapping allows for the replacement of a failed disk without shutting down the system. This capability is crucial for maintaining uptime and ensuring data redundancy and availability, especially in critical environments. The RAID controller rebuilds the data on the new disk using redundancy data from the other disks in the array, ensuring no data loss and minimal impact on system performance.
In the context of a FortiAnalyzer unit equipped with hardware RAID support, the optimal approach to addressing a hard disk failure is to perform a hot swap of the disk. Hardware RAID configurations are designed to provide redundancy and fault tolerance, allowing for the replacement of a failed disk without the need to shut down the system. Hot swapping enables the administrator to replace the faulty disk with a new one while the system is still running, and the RAID controller will rebuild the data on the new disk, restoring the RAID array to its fully operational state.References:FortiAnalyzer 7.2 Administrator Guide - "Hardware Maintenance" and "RAID Management" sections.

NEW QUESTION # 16
What is true about FortiAnalyzer reports?

• A. When you enable auto-cache, reports are scheduled by default.
• B. Reports can be saved in a CSV format.
• C. The reports from one ADOM are available for all ADOMs.
• D. You require an output profile before reports are generated.

Answer: D

Explanation:
For FortiAnalyzer reports, an output profile must be configured before reports can be generated and sent to an external server or system. This output profile determines how the reports are distributed, whether by email, uploaded to a server, or any other supported method. The options such as auto-cache, saving reports in CSV format, or reports availability across different ADOMs are separate features/settings and not directly related to the requirement of having an output profile for report generation.

NEW QUESTION # 17
What areanalytics logs on FortiAnalyzer?

• A. Logs that are compressed and saved to a log file
• B. Logs classified as type Traffic, or type Security
• C. Logs thatare indexed and stored in the SQL
• D. Logs that roll over when the log file reaches a specific size

Answer: C

Explanation:
On FortiAnalyzer, analytics logs refer to the logs that have been processed, indexed, and then stored in the SQL database. This process allows for efficient data retrieval and analytics. Unlike basic log storage, which might involve simple compression and storage in a file system, analytics logs in FortiAnalyzer undergo an indexing process. This enables advanced features such as quick search, report generation, and detailed analysis, making it easier for administrators to gain insights into network activities and security incidents.References:FortiAnalyzer 7.2 Administrator Guide - "Log Management" and "Data Analytics" sections.

NEW QUESTION # 18
Which two statements are true regarding the log synchronization states for HA on FortiAnalyzer? (Choose two.)

• A. By default. Log Data Sync is disabled on all backup devices.
• B. With Initial Logs Sync, when you add a unit to an HA cluster, the primary device synchronizes its logs with the backup device.
• C. When Log Data Sync is turned on, the backup device reboots and then rebuilds the log database with the synchronized logs.
• D. Log Data Sync provides real-time log synchronization to all backup devices.

Answer: B,D

Explanation:
For HA on FortiAnalyzer, Log Data Sync ensures real-time log synchronization among all cluster members, including backup devices. This feature is enabled by default. The Initial Logs Sync state is triggered when a new unit is added to an HA cluster, where the primary unit synchronizes its logs with the newly added unit.
After the initial synchronization, the secondary unit reboots and rebuilds its log database with the synchronized logs.References:FortiAnalyzer 7.2 Administrator Guide, "Log synchronization" section.

NEW QUESTION # 19
What is true about a FortiAnalyzer Fabric?

• A. The members send their logs to the supervisor.
• B. The supervisor and members cannot be in different time zones
• C. Supervisors support HA.
• D. Members events can be raised from the supervisor.

Answer: A

Explanation:
In a FortiAnalyzer Fabric, the FortiAnalyzer can recognize a Security Fabric group of devices, and it supports the Security Fabric by storing and analyzing logs from these units as if they were from a single device. The members of the Security Fabric group send their logs to the FortiAnalyzer, which acts as a supervisor for log storage and analysis, providing a centralized point of visibility and control over the logs.References:FortiAnalyzer 7.4.1 Administration Guide, "Security Fabric" section.

NEW QUESTION # 20
A rogue administrator was accessing FortiAnalyzer without permission.
Where can you view the activities that the rogue administrator performed on FortiAnalyzer?

• A. Fabric View
• B. FortiView
• C. System Settings
• D. Log View

Answer: B

Explanation:
To monitor the activities performed by any administrator, including a rogue one, on the FortiAnalyzer, you should use the FortiView feature. FortiView provides a comprehensive overview of the activities and events happening within the FortiAnalyzer environment, including administrator actions, making it the appropriate tool for tracking unauthorized or suspicious activities.References:FortiAnalyzer 7.4.1 Administration Guide,
"System Settings > Fabric Management" section.

NEW QUESTION # 21
Which two statements are true regarding the log synchronization states for HA on FortiAnalyzer? (Choose two.)

• A. By default. Log Data Sync is disabled on all backup devices.
• B. With Initial Logs Sync, when you add a unit to an HA cluster, the primary device synchronizes its logs with the backup device.
• C. When Log Data Sync is turned on, the backup device reboots and then rebuilds the log database with the synchronized logs.
• D. Log Data Sync provides real-time log synchronization to all backup devices.

Answer: B,D

Explanation:
For HA on FortiAnalyzer, Log Data Sync ensures real-time log synchronization among all cluster members, including backup devices. This feature is enabled by default. The Initial Logs Sync state is triggered when a new unit is added to an HA cluster, where the primary unit synchronizes its logs with the newly added unit.
After the initial synchronization, the secondary unit reboots and rebuilds its log database with the synchronized logs.References:FortiAnalyzer 7.2 Administrator Guide, "Log synchronization" section.

NEW QUESTION # 22
Which two statements are true regarding FortiAnalyzer system backups? (Choose two.)

• A. Backup files can be uploaded to SCP and SFTP servers.
• B. Existing reports can be included in the backup files.
• C. Scheduled system backups can be configured only from the CLI.
• D. The system reserves at least 5% to 20% disk space for backup files.

Answer: A,B

Explanation:
FortiAnalyzer allows for the inclusion of existing reports in the backup files, providing a comprehensive backup of configurations and data. Additionally, the backup files can be configured to be uploaded to SCP and SFTP servers, ensuring secure transfer and offsite storage of backup data. This can be configured both in the GUI and the CLI, providing flexibility in how backups are scheduled and managed.References:FortiAnalyzer
7.4.1 Administration Guide, "Scheduling automatic backups" section.

NEW QUESTION # 23
You finished registering a FortiGate device. After traffic starts to flow through FortiGate. you notice that only some of the logs expected are being received on FortiAnalyzer.
What could be the reason for the logs not arriving on FortiAnalyzer?

• A. This FortiGate is part of an HA cluster but it is the secondary device.
• B. FortiGate does not have logging configured correctly.
• C. This FortiGate model is not fully supported.
• D. FortiGate was added to the wrong ADOM type.

Answer: B

Explanation:
When only some of the expected logs from a FortiGate device are being received on FortiAnalyzer, it often indicates a configuration issue on the FortiGate side. Proper logging configuration on FortiGate involves specifying what types of logs to generate (e.g., traffic, event, security logs) and ensuring that these logs are directed to the FortiAnalyzer unit for storage and analysis. If the logging settings on FortiGate are not correctly configured, it could result in incomplete log data being sent to FortiAnalyzer. This might include missing logs for certain types of traffic or events that are not enabled for logging on the FortiGate device.
Ensuring comprehensive logging is enabled and correctly directed to FortiAnalyzer is crucial for full visibility into network activities and for the effective analysis and reporting of security incidents and network performance.

NEW QUESTION # 24
Which two methods can you use to restrict administrative access on FortiAnalyzer? (Choose two.)

• A. Limit access to specific virtual domains.
• B. Use administrator profiles.
• C. Fabric connectors to external LDAP servers.
• D. Configure trusted hosts.

Answer: B,D

Explanation:
To restrict administrative access on FortiAnalyzer, two effective methods are using administrator profiles and configuring trusted hosts. Administrator profiles allow for defining the level of access and permissions for different administrators, controlling what each administrator can seeand do within the FortiAnalyzer unit.
Configuring trusted hosts enhances security by limiting administrative access to specified IP addresses, ensuring that administrators can only connect from approved locations or networks, thus preventing unauthorized access from outside specified subnets or IP addresses.References:FortiAnalyzer 7.4.1 Administration Guide, "Administrators" and "Trusted hosts" sections.

NEW QUESTION # 25
Which feature can you configure to add redundancy to FortiAnalyzer?

• A. Primary and secondary DNS
• B. Link aggregation
• C. VLAN interfaces
• D. IPv6 administrative access

Answer: B

Explanation:
Link aggregation is a method used to combine multiple network connections in parallel to increase throughput and provide redundancy in case one of the links fail. This feature is used in network appliances, including FortiAnalyzer, to add redundancy to the network connections, ensuring that there is a backup path for traffic if the primary path becomes unavailable.References:The FortiAnalyzer 7.4.1 Administration Guide explains the concept of link aggregation and its relevance to

NEW QUESTION # 26
Which process caches logs on FortiGate when FortiAnalyzer is not readable?

• A. sqlplugind
• B. miglogd
• C. logfiled
• D. oftpd

Answer: C

Explanation:
The processlogfiledin FortiGate units with an SSD disk is responsible for buffering logs when FortiAnalyzer is unreachable. If the connection to FortiAnalyzer is lost and the memory log buffer is full,logfiledallows logs to be buffered on disk. These logs are then sent to FortiAnalyzer once the connection is restored. This reliable logging mechanism ensures that logs are not lost during periods when FortiAnalyzer is not reachable, thereby maintaining log integrity and continuity.References:FortiOS 7.4.1 Administration Guide, "Log Buffering" and
"Reliable Logging" sections.

NEW QUESTION # 27
An administrator has configured the following settings:

What is the purpose of executing these commands?

• A. To encrypt log transfer between FortiAnalyzer and other devices.
• B. To create the secure channel used by the OFTP process.
• C. To record the hash value and authentication code of log files.
• D. To verify the integrity of the log files received.

Answer: D

Explanation:
The purpose of executing the provided CLI commands, which include setting thelog-checksumtomd5-auth, is to ensure the integrity of the log files. This setting is used to record the MD5 hash value of log files, which is a widely used cryptographic hash function that produces a 128-bit (16-byte) hash value. By using MD5 authentication, FortiAnalyzer ensures that the log files have not been altered or tampered with during transit, thereby verifying their integrity upon receipt.This is not related to encrypting log transfers, scheduling reports, or creating secure channels for OFTP (Over-the-FortiGate Protocol) processes.

NEW QUESTION # 28
......

Fortinet NSE6_FAZ-7.2 certification exam is an essential certification for network security professionals looking to become FortiAnalyzer 7.2 administrators. Fortinet NSE 6 - FortiAnalyzer 7.2 Administrator certification validates the skills and knowledge required to configure and manage FortiAnalyzer 7.2, including performing backups and upgrades, configuring log settings, and creating custom reports. Fortinet NSE 6 - FortiAnalyzer 7.2 Administrator certification also provides access to the Fortinet NSE program, which offers a range of training and certification options for network security professionals.

 

NSE6_FAZ-7.2 dumps Free Test Engine Verified By It Certified Experts: https://www.vce4dumps.com/NSE6_FAZ-7.2-valid-torrent.html

NSE6_FAZ-7.2 Exam Free Practice Test with100% Accurate Answers: https://drive.google.com/open?id=1-RhMjr7qNP3n10P7lloGscyzqODPRxhh