[2023] Pass Cisco 300-810 Premium Files Test Engine pdf - Free Dumps Collection [Q80-Q105]

[2023] Pass Cisco 300-810 Premium Files Test Engine pdf - Free Dumps Collection

New 2023 Realistic 300-810 Dumps Test Engine Exam Questions in here

NEW QUESTION # 80
Drag and drop the events for an on-premises Jabber SAML SSO flow from the left into the correct order on the right.

Answer:

Explanation:

NEW QUESTION # 81
An engineer must configure a test user mailbox in a newly deployed Cisco Unity Express module. Which console command set reflects the correct configuration in this scenario?

A. Option D
B. Option B
C. Option A
D. Option C

Answer: C

NEW QUESTION # 82

Refer to the exhibit An engineer is troubleshooting a Cisco Jabber issue in Cisco UCM and validates that these configurations are correctly configured Cisco UCM Service discovery Cisco UCM User authentication *SOAP login Which protocol interactions between Cisco UCM and the Cisco IM and Presence servers must be validated next?

A. XMPP
B. SCCP
C. SAML
D. LDAP

Answer: D

NEW QUESTION # 83
Drag and drop the SAML components from the left onto the descriptions on the right.

Answer:

Explanation:

NEW QUESTION # 84
An administrator must configure a system distribution list for the IT staff that must be reachable via voice recognition using either the phrases "service desk" or "Help desk". Which advanced distribute list feature should be used to accomplish this task?

A. Alternate Diction
B. Alternate Greeting
C. Alternate Name
D. Alternate Extension

Answer: C

NEW QUESTION # 85
Refer to the exhibit.

Users connected to the internal network report a "Cannot communicate with the server" error while trying to log in to Cisco Jabber using auto service discovery. The Jabber diagnostics and the SRV record configuration are as shown in the exhibit. The host cucm1.ccnp.cisco.com is correctly resolved by the user desktops with the Cisco Unified Communications Manager IP address. Why is the user not able to log in?

A. The domain ccnp.cisco.com does not exist on the DNS server.
B. Marking weight as 0 on the SRV record makes it inactive, so Jabber cannot discover the Cisco Unified CM.
C. The port specified on the SRV record is wrong.
D. SRV protocol is not set up correctly. It should be _tls instead of _tcp.

Answer: C

NEW QUESTION # 86
A collaboration engineer is configuring SIP interdomain federation for Cisco IM and Presence. The external domain cannot be discovered using DNS SRV. If the external enterprise domain is ciscocollab.com, what destination pattem should the engineer use for a static route?

A. *.ciscocollab.com,*
B. com.ciscocollab.*
C. _sipfederationtls._tcp.ciscocollab.com
D. .ciscocollab.com

Answer: B

NEW QUESTION # 87
DRAG DROP
Drag and drop the events for an on-premises Jabber SAML SSO flow from the left into the correct order on the right.
Select and Place:

Answer:

Explanation:

NEW QUESTION # 88
Drag and drop the steps for SAML SSO authentication from the left into the order on the right.

Answer:

Explanation:

Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/SAML_SSO_deployment_guide/12_5_1/cucm_b_saml-sso-deployment-guide-12_5/cucm_b_saml-sso-deployment-guide-12_5_chapter_01.html

NEW QUESTION # 89
Refer to the exhibit.

Which action allows a remote Cisco Jabber user utilizing Mobile and Remote Access to automatically log in to a Cisco Unity Connection voicemail box via OAuth?

A. Add CUCM under System Settings > Authz Servers in Cisco Unity.
B. Add CUCM under System Settings > Authz Servers in Cisco Expressway-E.
C. Add CUCM under System Settings > Authz Servers in Cisco Expressway-C.
D. Add CUCM under System Settings > Authz Servers in Cisco Unity Connection.

Answer: D

NEW QUESTION # 90
What is the maximum number of Cisco Unity Connection locations connected in a HTTPS network?

A. 0
B. 1
C. 2
D. 3

Answer: B

NEW QUESTION # 91
Which step is the first for web-based single sign-on login?

A. Request access to protected service.
B. Authenticate.
C. Present authentication assertion.
D. Redirect to IdP to get authenticated.

Answer: A

Explanation:
Explanation

NEW QUESTION # 92
A collaboration engineer troubleshoots an Issue with Cisco IM and Presence federated with Microsoft Skype for Business. A Cisco Jabber user reports being unable to see the presence status of a user on Microsoft Skype for Business when searching for the Microsoft user. Which action resolves this issue?

A. Have the Jabber user add the Skype for Business user to the Jabber contact list.
B. Add a static route on Cisco IM and Presence to the Skype for Business domain.
C. Disable TLS for the federation.
D. Configure the federation to use the XMPP protocol.

Answer: B

NEW QUESTION # 93
Refer to the exhibit.

Cisco Unity Connection and Cisco Unified Communications Manager are integrated by using SCCP. The Voice Mail Ports are registered. Users report that calls fail when forwarded to voicemail. Which is a cause of the issue?

A. The call forward and call pickup settings do not have a CSS on Forward All.
B. The CSS on the Voice Mail Pilot is missing partitions for user phones.
C. The Voice Mail Pilot is not configured with a CSS that contains the INTERNAL_PT.
D. The Voice Mail Port partition on the CSS of the phone is missing.

Answer: A

NEW QUESTION # 94
Refer to the exhibit Users complain that the message waiting light on the IP phone does not light up when receiving a new voicemail With which codec must the engineer configure a dial peer on Cisco UCME for MW1 traffic to resolve this issue?

A. G.729r8
B. G.729ar8
C. G.711ulaw
D. G.711alaw

Answer: C

NEW QUESTION # 95
Which SAML 2.0 profile is supported by Cisco UCM, Cisco Unified IM and Presence, and Unity Connection version 10.x and above?

A. single logout
B. identity provider discovery
C. name identifier management
D. web browser SSO

Answer: D

NEW QUESTION # 96
In the integration of Cisco Unity Connection using SIP, which SIP trunk security profile option is required for MWI to work correctly?

A. Accept unsolicited notification
B. Accept replaces header
C. Accept out-of-dialog refer
D. Accept presence subscription

Answer: A

Explanation:
Reference:
https://community.cisco.com/t5/collaboration-voice-and-video/understanding-troubleshooting-mwi-on-unity-connection/ta-p/3162948
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/security/9_0_1/secugd/CUCM_BK_CCB00C40_00_cucm-security-guide-90/CUCM_BK_CCB00C40_00_cucm-security-guide_chapter_011001.pdf

NEW QUESTION # 97
Refer to the exhibit.

Cisco Unity Connection and Cisco Unified Communications Manager are integrated by using SCCP. The Voice Mail Ports are registered. Users report that calls fail when forwarded to voicemail. Which is a cause of the issue?

A. The call forward and call pickup settings do not have a CSS on Forward All.
B. The Voice Mail Pilot is not configured with a CSS that contains the INTERNAL_PT.
C. The Voice Mail Port partition on the CSS of the phone is missing.
D. The CSS on the Voice Mail Pilot is missing partitions for user phones.

Answer: D

NEW QUESTION # 98
Refer to the exhibit.

Which protocol is used for communication between Cisco IM and Presence and Microsoft Exchange Server?

A. XMPP
B. IMAP
C. EWS
D. POP3

Answer: C

NEW QUESTION # 99
Drag and drop the steps for SAML SSO authentication from the left into the order on the right.

Answer:

NEW QUESTION # 100
Which service must be activated on Cisco Unity Connection to utilize LDAP synchronization?

A. Cisco RIS Data Collector
B. Cisco Tomcat
C. Cisco DirSync
D. Cisco Sync Agent

Answer: C

Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/administration/ guide/10xcucsagx/10xcucsag120.html

NEW QUESTION # 101
Drag and drop the steps for SAML SSO authentication from the left into the order on the right.

Answer:

NEW QUESTION # 102
Drag and drop the events for an on-premises Jabber SAML SSO flow from the left into the correct order on the right.

Answer:

Explanation:

NEW QUESTION # 103
After integrating Cisco Unity Express with Cisco Unified Communications Manager Express, users report that the system does not respond to their digit presses. Which two configuration snippets resolve this issue?
(Choose two.)

A. dial-peer voice 6800 voip destination-pattern 5... session protocol sipv2 session target ipv4:10.3.6.127 dtmf-relay rtp-nte codec g711ulaw
B. dial-peer voice 6800 voip destination-pattern 5... session protocol sipv2 session target ipv4:10.3.6.127 dtmf-relay sip-kpml codec g711ulaw
C. dial-peer voice 6800 voip destination-pattern 5... session protocol sipv2 session target ipv4:10.3.6.127 dtmf-relay sip-kpml codec g729r8
D. dial-peer voice 6800 voip destination-pattern 5... session protocol sipv2 session target ipv4:10.3.6.127 dtmf-relay sip-notify codec g729r8
E. dial-peer voice 6800 voip destination-pattern 5... session protocol sipv2 session target ipv4:10.3.6.127 dtmf-relay sip-notify codec g711ulaw

Answer: A,E

NEW QUESTION # 104
SAML SSO is enabled in Cisco Unified Communications Manager. What happens when a browser-based client attempts to access a protected resource on a service provider?

A. The SAML request is maintained as a query parameter in the GET request.
B. The service provider generates a SAML authentication request.
C. The IdP checks for a valid browser session.
D. The browser follows the redirect and issues an HTTPS GET request to the IdP.

Answer: B

Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/ SAML_SSO_deployment_guide/12_5_1/cucm_b_saml-sso-deployment-guide-12_5/cucm_b_saml-sso- deployment-guide-12_5_chapter_01.html

NEW QUESTION # 105
......

Updated Official licence for 300-810 Certified by 300-810 Dumps PDF: https://www.vce4dumps.com/300-810-valid-torrent.html

Newly Released 300-810 Dumps for CCNP Collaboration Certified: https://drive.google.com/open?id=1857D0pCWv4V7qPBZAGQjSUl-mBbGf5sR

Try Before You Buy

Download a free sample of any of our exam questions and answers

[2023] Pass Cisco 300-810 Premium Files Test Engine pdf - Free Dumps Collection [Q80-Q105]

Related Articles

Latest VCE Dumps

Useful Links

Contact Us