[Oct 25, 2025] Fully Updated Dumps PDF - Latest 300-635 Exam Questions and Answers

100% Free 300-635 Exam Dumps to Pass Exam Easily from VCE4Dumps

NEW QUESTION # 15
Refer to the exhibit.

The exhibit shows a Cisco NX-OS switch configuration, an Ansible playbook, and the output of running this playbook. The playbook failed due to error "msg' 'Request failed <urlopen error [Errno 61] Connection refused>', 'status' -1, "url" "http://192.168.251.129:80/ins".
Which Cisco NX-OS configuration command resolves this failure?

• A. feature http
• B. http-server enabled
• C. interface mgmt0; ip access-group allow_http_traffic in
• D. feature nxapi

Answer: D

NEW QUESTION # 16
Which Cisco UCS PowerTool commands initiate a Cisco UCS Manager connection?

• A. Option C
• B. Option D
• C. Option B
• D. Option A

Answer: A

Explanation:
The Cisco UCS PowerTool is a PowerShell module that provides an interface to Cisco Unified Computing System (UCS) Manager API. To initiate a connection to the Cisco UCS Manager, the 'Connect-Ucs' cmdlet is used. This cmdlet requires parameters such as the name of the UCS domain (in this case,
'myucsm.example.com') and credentials stored in a variable (here represented as '$ucsm_creds'). The credentials are typically created beforehand using the 'New-Object' cmdlet with a PSCredential object type, which securely stores the username and password required for authentication. References := Cisco UCS PowerTool Suite - PowerShell Libraries for Cisco UCS Manager

NEW QUESTION # 17
Which procedure accesses the REST API browser within Cisco UCS Director?

• A. Log in as the user REST/user to access the REST API interface.
• B. Enable the Developer menu Select Orchestration in the Ul, then select the REST API browser
• C. Select the API browser from the Cisco UCS Director End User Portal catalog of services
• D. Send an HTTP GET request to https://[UCS Director IP]/api/get_resources/

Answer: A

NEW QUESTION # 18
Refer to the exhibit.

Refer to the exhibit:
Which change allows the code to configure VLAN 10 in the Cisco UCS?

• A. Line 4 should include transport 443 option
• B. Line 3 should add an import for query_dn
• C. Line 13 should include "handle.commit()"
• D. Lines 8 and 9 should have a line continuation \ at the end

Answer: C

Explanation:
The code snippet is intended to configure VLAN 10 in Cisco UCS. After creating the VLAN object and adding it with handle.add_mo(newvlan), it is essential to commit the changes to the UCS Manager for them to take effect. This is done by invoking handle.commit(). Without this step, the changes will not be saved, and VLAN 10 will not be configured.
* Cisco UCS Manager API Reference Guide

NEW QUESTION # 19
Which two statements about gRPC are true? (Choose two )

• A. It runs over SSH
• B. It is an open source initiative
• C. It is an IETF draft
• D. It is an IETF standard
• E. It runs over HTTPS

Answer: B,C

NEW QUESTION # 20
A co-worker is using Cisco Intersight to determine the maximum available memory per server for their company's data center. Drag and drop the code to complete the Cisco Intersight API call that provides the desired results. Not all options are used.

Answer:

Explanation:

NEW QUESTION # 21
DRAG DROP
Drag and drop the items to complete the request to retrieve the current firmware of Cisco UCS devices from the Cisco Intersight API. Not all items are used.
Select and Place:

Answer:

Explanation:

Section: Data Center Compute
Explanation/Reference: https://developer.cisco.com/codeexchange/github/repo/CiscoUcs/intersight-python/

NEW QUESTION # 22
Refer to the exhibit.

Which Ansible module is needed in line 8 to create a new VLAN 10 on the hosts defined in the "ucs" group?

• A. vlans
• B. nxos_vlans
• C. ucs_vlans
• D. vlan

Answer: C

Explanation:
Section: Data Center Compute

NEW QUESTION # 23
When the Cisco bigmuddy-network-telematry-collector from GitHub is used, which command displays only the message headers?

• A. -print-all
• B. -print
• C. -all
• D. -brief

Answer: D

Explanation:
The -brief command in the Cisco bigmuddy-network-telemetry-collector is used to display only the message headers. This command provides a concise view of the telemetry data streamed from XR routers, which is useful for quick inspections or debugging purposes without the need for full message details1.
References := Cisco Code Exchange, VCEGuide

NEW QUESTION # 24
Refer to the exhibit.

Which two statements are true about this API GET request to the ACI APIC? (Choose two.)

• A. The API response is encoded in XML.
• B. The API call reads information from a managed object.
• C. The API call reads information from an object class.
• D. The API response is encoded in JSON.
• E. The API call creates a new 10G interface in the APIC.

Answer: A,B

Explanation:
Section: Controller Based Data Center Networking

NEW QUESTION # 25
Refer to the exhibit:

Assuming a new ACI instance what is the result when this script is run?

• A. Nine objects are created
• B. Ten objects are created and subsequently deleted
• C. Ten objects are created
• D. An exception is thrown

Answer: A

NEW QUESTION # 26
What happens when the TFTP server is not available?

• A. CUCM can't read phone configurations
• B. Phones need to be restarted
• C. TFTP server needs to be restarted
• D. Phones can't download configuration

Answer: D

NEW QUESTION # 27
Which Python code creates a VRF in an ACI tenant using the Cobra SDK?

• A. Ctx(Tenant (uniMo, 'CustA"), ,CustA_VRF')
• B. Ctx(fvTenant(uniMo. 'CustA'), 'CustA_VRF')
• C. Vrf(fvTenant(uniMo, 'CustA'), 'CustA_VRF)
• D. Vrf(Tenatnt(uniMo, 'CustA'), 'CustA_VRR)

Answer: C

Explanation:
The Python code Vrf(fvTenant(uniMo, 'CustA'), 'CustA_VRF) creates a VRF in an ACI tenant using the Cobra SDK. The Vrf class is instantiated with a parent fvTenant object and the name of the VRF.

NEW QUESTION # 28
Drag and drop the correct YAML components from the bottom onto the correct blanks within the Ansible playbook to create a new application profile called "DbApp" using the Ansible ACI module. Not all options are used.

Answer:

Explanation:

NEW QUESTION # 29
Refer to the exhibit.

A Python script using ACI Cobra SDK has been constructed. What is the result when running this script?

• A. It prints out the distinguished name of all application profiles.
• B. It prints out the relative name of all application profiles.
• C. It prints out the relative name of all tenants.
• D. It prints out the distinguished name of all tenants.

Answer: A

NEW QUESTION # 30
Which procedure accesses the REST API browser within Cisco UCS Director?

• A. Enable the Developer menu. Select Orchestration in the UI, then select the REST API browser tab.
• B. Select the API browser from the Cisco UCS Director End User Portal catalog of services.
• C. Log in as the user REST/user to access the REST API interface.
• D. Send an HTTP GET request to https://[UCS Director IP]/api/get_resources/.

Answer: A

Explanation:
Section: Data Center Compute

NEW QUESTION # 31
Refer to the exhibit:

Refer to the exhibit, Which two Cisco UCS PowerTool commands provide this output? (Choose two)

• A. Get-UcsServer | Select-Object Dn
• B. Get-UcsRackUnit | Select-Object Dn
• C. Get-UcsRackSystems | Select-Object Dn
• D. Get-UcsBlade | Select-Object Dn
• E. Get-UcsSystems | Select-Object Dn

Answer: B,D

Explanation:
The output shown in the exhibit is a list of distinguished names (DNs) for Cisco Unified Computing System (UCS) blades within specific chassis. The correct PowerTool commands to provide this output would be those that retrieve information about UCS blade servers and then select their distinguished names. The command Get-UcsBlade | Select-Object Dn retrieves all the UCS blade servers and then pipes them to the Select-Object cmdlet to display only their distinguished names, which matches the pattern seen in the exhibit. Similarly, Get-UcsRackUnit | Select-Object Dn could potentially provide a similar output if rack units are named in a similar fashion to blades within the system's naming conventions. References :=
* Cisco UCS PowerTool Suite - PowerShell Libraries for Cisco UCS Manager: 1
* Cisco UCS Manager CLI Configuration Guide: 2

NEW QUESTION # 32
Which two statements about Cisco Nexus 7000 line cards are true? (Choose two.)

• A. M line cards are service-oriented and likely face the access layer and provide Layer 2 connectivity.
• B. The F2 line card must reside in the admin VDC.
• C. M line cards support Layer 2, Layer 3, and Layer 4 with large forwarding tables and a rich feature set.
• D. M1, M2, and F1 cards are allowed in the same VDC.
• E. F line cards are performance-oriented and likely connect northbound to the core layer for Layer 3 connectivity.

Answer: C,D

Explanation:
Explanation/Reference:
Explanation:
Cisco is introducing a new line card called as F3 Module which has rich feature set and offers high performance 40G/100G port density to the Nexus 7000 product family. Cisco also introduced a new feature in NX-OS 6.2(2) where the F2e line card can be in the same VDC as M1 or M2 Line Card. The objective of this session is to cover detailed steps and methodology of migrating Nexus 7000 with VDC types prior to NX-OS
6.2 to the newer F3 or M/F2e VDC types. The session also covers the effect of VDC migration with commonly used Network features, firewall and load balancer services.
M-Series XL modules support larger forwarding tables. M-Series modules are frequently required at network core, peering, and aggregation points. When used with the F1-Series, the M-Series modules provide inter- VLAN services and form a pool of Layer 3 resources for the system.
Reference:
http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Data_Center/VMDC/2-6/vmdctechwp.html

NEW QUESTION # 33
Refer to the exhibit.

The script is called deltacounters.py and it is currently inside a Guest Shell container running inside a Cisco NX-OS switch.
Which Cisco NX-OS command results in a successful execution of this script?

• A. show python bootflash:deltacounters.py ethernet1/1
• B. guestshell execute python /home/admin/deltacounter.py ethernet1/1
• C. guestshell run python /home/admin/deltacounter.py ethernet1/1
• D. python /home/admin/bootflash:deltacounters.py ethemet1/1

Answer: C

Explanation:
Section: Data Center Device-centric Networking

NEW QUESTION # 34
Refer to the exhibit.

Which action does the execution of this ACI Cobra Python code perform?

• A. It prints all LLDP neighbor MAC and IP addresses.
• B. It prints all APIC MAC and IP addresses.
• C. It prints all Cisco Discovery Protocol neighbor MAC and IP addresses.
• D. It prints all endpoint MAC and IP addresses.

Answer: D

Explanation:
Section: Controller Based Data Center Networking

NEW QUESTION # 35
How is an ACI class name composed?

• A. MitName:Method
• B. ClassName:Method
• C. :Method
• D. Package:ClassName

Answer: D

NEW QUESTION # 36
What configuration is required when implementing FCoE?

• A. disable LAN traffic on the interface
• B. permit all VSANs on the interface
• C. configure PortFast on the access port
• D. permit all VLANs on the interface

Answer: A

Explanation:
DCBX allows the switch to send a LAN Logical Link Status (LLS) message to a directly-connected CNA.
Enter the shutdown lan command to send an LLS-Down message to the CNA. This command causes all VLANs on the interface that are not enabled for FCoE to be brought down. If a VLAN on the interface is enabled for FCoE, it continues to carry SAN traffic without any interruption.
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/fcoe/ b_Cisco_Nexus_5000_Series_NX-OS_Fibre_Channel_over_Ethernet_Configuration_Guide_/ Cisco_Nexus_5000_Series_NX-OS_Fibre_Channel_over_Ethernet_Configuration_Guide__chapter3.html

NEW QUESTION # 37
What is the default data encoding for the response output of the ACI APIC API inspector?

• A. JSON
• B. csv
• C. XML
• D. YAML

Answer: B

NEW QUESTION # 38
Drag and drop the correct code snippets into the Python code to create a new application profile "WebApp" using the ACI REST API. Not all options are used.

Answer:

Explanation:

NEW QUESTION # 39
Which two initial actions should be taken when exploring automation capabilities for ACI? (Choose Two)

• A. Develop an open-source package or SDK
• B. Use the ncclient command to explore the NETCONF capabilities
• C. Use the API Inspector and test API Calls
• D. Look for an open-source package or SDK
• E. Write scripts that leverage the Python Standard Library

Answer: C,D

Explanation:
When exploring automation capabilities for ACI, it's beneficial to:
* B. Look for an open-source package or SDK: These resources can simplify the process by providing pre-built functions and methods for common tasks.
* C. Use the API Inspector and test API Calls: The API Inspector within ACI allows you to see the API calls that are made when you perform actions in the GUI, which is invaluable for understanding how to automate those actions.
References:
* ACI documentation on Cisco's official website
* Community forums and discussions on Cisco's automation tools

NEW QUESTION # 40
......

Free 300-635 Exam Questions 300-635 Actual Free Exam Questions: https://www.vce4dumps.com/300-635-valid-torrent.html

Verified 300-635 dumps and 76 unique questions: https://drive.google.com/open?id=147bt7cMcuwJ4SDJBjqjyssL_YyZhK-IE