Get Latest [Apr-2026] Conduct effective penetration tests using VCE4Dumps 156-590
Penetration testers simulate 156-590 exam PDF
NEW QUESTION # 44
Task: Enable Threat Prevention blades including IPS on a Security Gateway via SmartConsole.
Answer:
Explanation:
See the Explanation.Explanation:
1- Open SmartConsole > Gateways & Servers.
2- Double-click your Security Gateway.
3- Go to the "General Properties" tab.
4- Check "IPS", "Anti-Bot", and "Anti-Virus".
5- Click OK, publish changes, then install the policy.
NEW QUESTION # 45
Task: Use CLI to test the management server connectivity from the Security Gateway.
Answer:
Explanation:
See the Explanation.Explanation:
1- SSH into the Security Gateway.
2- Ping the management server: ping .
3- Check hostname resolution: nslookup .
4- Confirm SIC is established: cp_conf sic state.
5- Check for outbound connectivity on port 18210 (CPD).
NEW QUESTION # 46
Task: Validate the IPS update server connectivity from the gateway.
Answer:
Explanation:
See the Explanation.Explanation:
1- SSH into the gateway.
2- Use: curl -v https://updates.checkpoint.com
3- Confirm DNS resolves and certificate is valid.
4- Check proxy settings if blocked.
5- Verify SmartConsole > Gateways > Update section reflects success.
NEW QUESTION # 47
Task: Enable "Update Automatically" for IPS database.
Answer:
Explanation:
See the Explanation.Explanation:
1- Go to Threat Prevention > Updates in SmartConsole.
2- Enable "Check for updates automatically."
3- Set interval (e.g., every 6 hours).
4- Tick "Install updates automatically" with warning prompt.
5- Click OK, publish, and monitor update logs.
NEW QUESTION # 48
Task: Customize Threat Prevention profile for web servers with fewer protections.
Answer:
Explanation:
See the Explanation.Explanation:
1- Clone an existing profile, name it Web_Servers_Profile.
2- Disable Anti-Bot (not applicable for outbound traffic).
3- Keep Anti-Virus and IPS with only essential protections enabled.
4- Set high-performance protections to "Detect" or "Inactive."
5- Apply the profile to traffic destined for web servers.
NEW QUESTION # 49
Task: Create a custom Threat Prevention profile named Corporate_TP_Strict in SmartConsole.
Answer:
Explanation:
See the Explanation.Explanation:
1- Go to Threat Prevention > Profiles.
2- Click "New Profile", name it Corporate_TP_Strict.
3- In the base profile, select Optimized as a starting point.
4- Enable IPS, Anti-Bot, Anti-Virus, Threat Emulation, and Threat Extraction.
5- Save the profile for later assignment to a policy rule.
NEW QUESTION # 50
Task: Generate a report of Anti-Bot and AV incidents.
Answer:
Explanation:
See the Explanation.Explanation:
1- Open SmartEvent > Reports.
2- Choose a template like "Threat Prevention Overview."
3- Filter data by blades: Anti-Bot and Anti-Virus.
4- Generate report for last 7 days.
5- Export as PDF or schedule as recurring email.
NEW QUESTION # 51
Task: Verify if a specific IPS protection is active.
Answer:
Explanation:
See the Explanation.Explanation:
1- Go to Threat Tools > IPS Protections.
2- Use the filter to search by name or CVE ID.
3- Confirm status is "Active" and assigned to profile.
4- Double-click to view scope and affected profiles.
5- Confirm via SmartConsole logs if it triggered recently.
NEW QUESTION # 52
Task: Enable logging of blocked malware downloads in the profile.
Answer:
Explanation:
See the Explanation.Explanation:
1- Edit the custom profile > Anti-Virus tab.
2- Ensure action for medium/high confidence is set to Prevent.
3- Enable Track = Log.
4- Save and push policy.
5- Review logs by filtering blade:"Anti-Virus" and action:"Prevented".
NEW QUESTION # 53
Task: Assign Anti-Bot and Anti-Virus profiles to a Threat Prevention policy rule.
Answer:
Explanation:
See the Explanation.Explanation:
1- Open Threat Prevention > Policy.
2- Add a rule with appropriate Source, Destination, Services.
3- Under "Profile," assign the custom AV/AB profile.
4- Set Action to "Accept" and Track to "Log."
5- Publish and install the policy.
NEW QUESTION # 54
Task: Test action taken for suspected bot-infected host.
Answer:
Explanation:
See the Explanation.Explanation:
1- Generate outbound suspicious DNS request (e.g., using simulated botnet domain).
2- Review logs in SmartConsole > blade:"Anti-Bot".
3- Confirm whether the connection was blocked or allowed.
4- Validate host quarantine action, if configured.
5- Check endpoint if agent alerts were triggered.
NEW QUESTION # 55
Task: Update IPS protection database on the Security Gateway manually.
Answer:
Explanation:
See the Explanation.Explanation:
1- SSH into the Gateway.
2- Run: ips update now to fetch new protections.
3- Verify update status: ips stat or cpview.
4- Check update timestamp in SmartConsole > Gateways > Threat Prevention > Updates.
5- Confirm protections appear in IPS Protections list.
NEW QUESTION # 56
Task: Check if Anti-Bot is blocking known Command and Control (C&C) traffic.
Answer:
Explanation:
See the Explanation.Explanation:
1- Simulate traffic to a test C&C domain (in a safe lab).
2- Monitor logs with: blade:"Anti-Bot" and action:"Prevented".
3- Confirm the threat name and DNS/IP contacted.
4- Check confidence level = High.
5- Ensure profile is set to "Prevent" for high-confidence threats.
NEW QUESTION # 57
Task: Enable Threat Prevention debug mode for troubleshooting.
Answer:
Explanation:
See the Explanation.Explanation:
1- SSH into the Gateway.
2- Run: tecli debug on or pdp debug on.
3- Reproduce the issue.
4- View logs in $FWDIR/log/.
5- Disable debug mode: tecli debug off.
NEW QUESTION # 58
Task: Test connection to Check Point Update Services.
Answer:
Explanation:
See the Explanation.Explanation:
1- SSH into Gateway.
2- Use: curl -v https://updates.checkpoint.com.
3- Validate certificate and connection success.
4- Check DNS resolution of update servers.
5- Use SmartConsole > Logs to monitor blocked connections if failed.
NEW QUESTION # 59
Task: Add user-defined protections to a custom profile.
Answer:
Explanation:
See the Explanation.Explanation:
1- Open Threat Tools > Protections > Create New Protection.
2- Configure parameters (CVE, service, behavior).
3- Assign the new protection to the custom profile.
4- Set action and performance level.
5- Save and install policy.
NEW QUESTION # 60
Task: Create a Threat Prevention profile exclusively for outbound traffic.
Answer:
Explanation:
See the Explanation.Explanation:
1- Clone the "Optimized" profile > name it Outbound_Profile.
2- Disable Threat Emulation and Extraction.
3- Enable IPS, Anti-Bot, Anti-Virus.
4- Apply only to Internet-bound rules.
5- Use action: Prevent for known C&C and malware traffic.
NEW QUESTION # 61
Task: Revert a mistakenly modified IPS protection to its default state.
Answer:
Explanation:
See the Explanation.Explanation:
1- Go to IPS Protections > Locate modified entry.
2- Click "Revert to Check Point default."
3- Confirm action and apply changes.
4- Publish and install policy.
5- Log actions confirm protection now behaves as default.
NEW QUESTION # 62
Task: Configure inspection settings for mobile VPN users.
Answer:
Explanation:
See the Explanation.Explanation:
1- Go to Threat Prevention > Inspection Settings.
2- Add a new exception group for mobile user IP pool.
3- Set reduced inspection sensitivity for this group.
4- Save, publish, and test VPN user traffic.
5- Ensure logs still show critical threats being detected.
NEW QUESTION # 63
Task: Simulate a file download test and confirm Anti-Virus prevention using the custom profile.
Answer:
Explanation:
See the Explanation.Explanation:
1- Use EICAR test file in a browser.
2- Confirm file is blocked and logs show blade:"Anti-Virus" and action:"Prevented".
3- Confirm the active profile name matches your custom profile.
4- Check logs for file hash and signature info.
5- Document success as part of validation.
NEW QUESTION # 64
Task: Manually trigger an IPS update from SmartConsole.
Answer:
Explanation:
See the Explanation.Explanation:
1- Go to Threat Prevention > Updates.
2- Click "Check Now" under IPS section.
3- Wait for update to complete and view the status log.
4- On the gateway, check $FWDIR/log/ips_update.elg for details.
5- Confirm the update applied with ips stat.
NEW QUESTION # 65
......
Tested Material Used To 156-590 Test Engine: https://www.vce4dumps.com/156-590-valid-torrent.html
Steps Necessary To Pass The 156-590 Exam: https://drive.google.com/open?id=1SgmVC1l5NF7jeCdvnzzODgkEBJ7zWI7n