(2025) D-NWR-DY-01 Dumps and Practice Test (754 Questions)

Guide (New 2025) Actual EMC D-NWR-DY-01 Exam Questions

NEW QUESTION # 48
Your Oracle DBA runs an RMAN script via cron to back up their data to an EMC NetWorker server. You run a report using the NetWorker Management Console (NMC) to view all backup activity. The Oracle backups are missing from the report.
How do you explain this?

• A. A save set detail report needs to be run via NMC to see RMAN backups.
• B. An NMC status report needs to be run on the Oracle client to see this information.
• C. You need to run an event summary in NMC to see data backed up using a Net Worker module.
• D. Data that is backed up manually is not tracked by NMC reporting.

Answer: D

NEW QUESTION # 49
What are two best practices when selecting a location for the NetWorker database? (Select 2)

• A. Is placed on a SAN volume.
• B. Is placed on the same drive as the OS.
• C. Should be located on a different disk volume from the OS.
• D. Is placed on NAS storage.

Answer: A,C

NEW QUESTION # 50
In a Microsoft Windows environment, an EMC NetWorker backup administrator attempts to recover the VSS SYSTEM save sets to another location. However, the recovery fails.
Whatis the reason for the failure?

• A. All VSS SYSTEM savesets were being recovered at the same time
• B. Source and destination clients may be of different OS types
• C. System was not rebooted before starting the recovery
• D. VSS does not support directed recoveries

Answer: D

NEW QUESTION # 51
What are valid backup levels in EMC Networker?

• A. Full, Incremental, Differential, Logs only, and Synthetic Full
• B. Full, Incremental, Cumulative Incremental, Logs only, and Synthetic Full
• C. Full, Incremental, Cumulative Incremental, and Level 0-9
• D. Full, Incremental, Differential, Level 0-9, and Synthetic Full

Answer: B

NEW QUESTION # 52
A customer has the following EMC NetWorker configuration:
- Two remote storage nodes, Node A and Node B
- Two virtual tape libraries configured on Node A and Node B, respectively
- Twelve virtual tape devices with four drives attached to the NetWorker server, Node A and Node B, respectively How many nsrlcpd processes are running on the NetWorker server?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: C

NEW QUESTION # 53
What databases does the NMDA Backup and Recovery feature support for NSM snapshot backups?

• A. IBM DB2 and IBM Domino
• B. Oracle and Sybase
• C. Oracle and IBM Domino
• D. Oracle and IBM DB2

Answer: D

NEW QUESTION # 54
What is a recommendation to make more space available when the file system containing an AFTD becomes full?

• A. Manually clone the largest save sets to another volume
• B. Stage older save sets to another volume
• C. Configure AFTD to continue backups automatically on another volume
• D. Change the device to a file type device

Answer: B

NEW QUESTION # 55
When backing up a Lotus Domino database with EMC NetWorker Module for Databases and Applications, how is the Lotus Domino backup level determined?

• A. For scheduled backups, backup level is determined by the level specified in EMC NetWorker Schedules resource.
• B. For manual backups, backup level is determined by the level specified in EMC NetWorker Schedules resource.
• C. For scheduled backups, backup level is determined by the NSR_BACKUP_LEVEL parameter in NMDA configuration file.
• D. For manual backups, backup level is always Full by default and this can not be changed.

Answer: A

NEW QUESTION # 56
A Dell EMC storage administrator has configured a client snapshot backups using Networker Snapshot Management. The backup completed successfully and the administrator is now ready to restore the data.
Which type of restore will destroy all existing data on the target application volume?

• A. Directed
• B. Snapshot
• C. Restore from rollover
• D. Rollback

Answer: D

NEW QUESTION # 57
When is it recommended that CloudBoost site cache be configured with Dell EMC NetWorker and a public cloud provider?

• A. Cloud object store is inaccessible from the LAN
• B. Connectivity to the cloud provider has low latency
• C. Backing up to the cloud and backing up from within the cloud
• D. Streaming workloads or continuous backups are running

Answer: D

NEW QUESTION # 58
You have an EMC NetWorker backup group containing 10 clients. Each client will be backed up at either a Level Full, Incremental, or Differential every day. The backup level for each is controlled by one of five different schedules applied at the client level. The group is used only to control the start time.
What is the most efficient method to force an immediate Full backup of all clients?

• A. Create a new group, add each client to it, set the Level Override to Full
• B. Modify each of the five schedules to perform only Full backups
• C. Perform a client-initiated Full backup of each client individually
• D. Set the Level Override on the group to Full

Answer: D

NEW QUESTION # 59
Refer to the exhibit.

Based on the save set attribute defined in the EMC NetWorker client properties window, what is backed up?

• A. NMC installation directory
• B. Media database
• C. NMC database
• D. /gst_on_noos1demo01 directory

Answer: C

NEW QUESTION # 60
A NetWorker administrator is tasked to encrypt, harden, and change the existing VMware Proxy configuration for the NetWorker server instance.
Use the simulator to explore the system and to modify existing Proxy configuration to meet the following criteria:
# Max hotadd sessions from 13 to 8
# Max NBD sessions from 0 to 2
# Password change to P@ssword! for the user "admin"
When you have finished, continue to the next question.

Answer:

Explanation:
See explanation below.
Explanation:
In the Simulator, do the following:
1.Open vProxy Settings
In the left menu clickProtection#VMware Protection#Virtual Proxies.
Select your existing proxy entry and clickEdit.
2.Adjust Transport Sessions
- UnderTransport Settings(orSession Limits), change:
Max HotAdd Sessionsfrom13down to8.
Max NBD Sessionsfrom0up to2.
3.Update the Admin Password
Scroll to theAuthentication(orCredentials) section.
For useradmin, enter the new passwordP@ssword!(and confirm it).
4.Save
ClickSaveto apply your changes.

NEW QUESTION # 61
A backup administrator has configured a new library using the EMC NetWorker Management Console on an existing storage node. They notice that the library does not show ready in the NMC. Before running backups to the new library, the administrator wants to ensure the process that controls the library is running.
Which process should the administrator look for on the storage node?

• A. nsrlcpd
• B. nsrsnmd
• C. nsrmmd
• D. nsrexecd

Answer: A

NEW QUESTION # 62
A NetWorker server has a PowerProtect DDVE attached It is running out of space, and a customer needs to offload some data to AWS S3.
What is the recommended way to perform this?

• A. Utilize a Dell EMC Cloud Tier feature.
• B. Deploy a NetWorker storage node in AW
• C. Deploy a NetWorker storage node in AW
• D. Manually copy data to AWS S3

Answer: D

NEW QUESTION # 63
An administrator using EMC Networker Power edition attempts to set server parallelism to 96 when adding a remote storage node. When saving the changes to the configuration, they notice that the server parallelism reverts back to 64.
What action needs to be taken to set server parallelism to 96?

• A. Configure group parallelism to 96.
• B. Enable diagnostic mode.
• C. Add EMC Networker Storage Node Enabler Code.
• D. Set device max sessions to 96.

Answer: C

NEW QUESTION # 64
Which process needs to be running on each EMC NetWorker client?

• A. nsrexecd
• B. nsrmmd
• C. nsrjobd
• D. nsrd

Answer: A

NEW QUESTION # 65
What is a characteristic of using EMC NetWorker Snapshot Management?

• A. Leverages storage system-based snapshot technology
• B. Must be licensed separately from the capacity licensing model
• C. Replaces the NetWorker SnapImage module
• D. Requires a separate software installation on the NetWorker client

Answer: A

NEW QUESTION # 66
A customer using EMC NetWorker Power edition attempts to set server parallelism to 96. When saving the changes they notice that the server parallelism reverts back to 64.
What action needs to be taken to set server parallelism to 96?

• A. Configure group parallelism to 96.
• B. Enable diagnostic mode.
• C. Add NetWorker Storage Node Enabler Code.
• D. Set device max sessions to 96.

Answer: C

NEW QUESTION # 67
......

D-NWR-DY-01 Exam Dumps Pass with Updated 2025 Certified Exam Questions: https://www.vce4dumps.com/D-NWR-DY-01-valid-torrent.html

D-NWR-DY-01 Exam Questions - Real & Updated Questions PDF: https://drive.google.com/open?id=177IYlyExJSm72-cRDlET6rvdDdXSF2AY