Verified EX447 Dumps Q&As - EX447 Test Engine with Correct Answers

Pass Your EX447 Dumps as PDF Updated on 2023 With 26 Questions

RedHat EX447 Exam Syllabus Topics:

NEW QUESTION 14
Create a playbook called issue.yml in /home/sandy/ansible which changes the file /etc/issue on all managed nodes: If host is a member of (lev then write "Development" If host is a member oftestthen write "Test" If host is a member ofprodthen write "Production"

Answer:

Explanation:
See the Explanation for complete Solution below.
Explanation
Solution as:

NEW QUESTION 15
Using the Simulation Program, perform the following tasks:
Ad-Hoc Ansible Commands (Number Two) Task:
1.Use the ad-hoc command to make sure php is installed.
2. Use the ad-hoc command to make sure that php is installed and is the latest version.
3. Use the ad-hoc command to make sure that httpd is installed.
4. Use the ad-hoc command to remove httpd fromthe servers.

Answer:

Explanation:
See the Explanation for complete Solution below.
Explanation
1. ansible all -b -m yum -a 'name=php state=present'
2. ansible all -b -m yum -a 'name=php state=latest'
3. ansible all -b -m yum -a 'name=httpd state=latest'
4. ansibleall -b -m yum -a 'name=httpd state=absent'

NEW QUESTION 16
Install and configure ansible
Userbobhas been created on your control node. Give him the appropriate permissions on the control node.Install the necessary packages to run ansible on the control node.
Create a configuration file /home/bob/ansible/ansible.cfg to meet the following requirements:
* The roles path should include /home/bob/ansible/roles, as well as any other path that maybe required for the course of the sample exam.
* The inventory file path is /home/bob/ansible/inventory.
* Ansible should be able to manage 10 hosts at a single time.
* Ansible should connect to all managed nodes using the bob user.
Create an inventory file for the following five nodes:
nodel.example.com
node2.example.com
node3.example.com
node4.example.com
node5.example.com
Configure these nodes to be in an inventory file where node1 is a member of groupdev.nodc2 is a member of group test, nodc3 is a member of group nodc4 and node 5 are members of groupprod.Also,prodis a member of group webservers.

Answer:

Explanation:
See the Explanation for complete Solution below.
Explanation
In/home/sandy/ansible/ansible.cfg
[defaults]
inventory=/home/sandy/ansible/inventory
roles_path=/home/sandy/ansible/roles
remote_user= sandy
host_key_checking=false
[privilegeescalation]
become=true
become_user=root
become_method=sudo
become_ask_pass=false
In /home/sandy/ansible/inventory
[dev]
node1 .example.com
[test]
node2.example.com
[proxy]
node3 .example.com
[prod]
node4.example.com
node5 .example.com
[webservers:children]
prod

NEW QUESTION 17
In /home/sandy/ansible/create a playbook called the play create a logical volume calledIv0and make it of size 1500MiB on volume group If there is not enough space in the volume groupprinta message
"Not enough space for logical vol instead. If the volume group still doesn't exist, create a message"Volume group doesn't exist" filesystem on allIv0logical volumes. Don't mount the logical volume.

Answer:

Explanation:
See the Explanation forcomplete Solution below.
Explanation
Solution as:

NEW QUESTION 18
Create a file calledrequirements.ymlin/home/sandy/ansible/rolesto install two roles. The source for the first role is geerlingguy.haproxy and geerlingguy.php. Name the first haproxy-role and the second php-role. The roles should be installed in/home/sandy/ansible/roles.

Answer:

Explanation:
See the Explanation for complete Solution below.
Explanation
in /home/sandy/ansible/roles
vim requirements.yml

Run the requirements file from the roles directory:
ansible-galaxy install -r requirements.yml -p /home/sandy/ansible/roles

NEW QUESTION 19
Install and configure ansible
User sandy has been created on your control node with the appropriate permissions already, do not change or modify ssh keys. Install the necessary packages to run ansible on the control node. Configure ansible.cfg to be in folder /home/sandy/ansible/ansible.cfg and configure to access remote machines via the sandy user. All roles should be in the path /home/sandy/ansible/roles. The inventory path should be in
/home/sandy/ansible/invenlory.
You will have access to 5 nodes.
node1.example.com
node2.example.com
node3.example.com
node4.example.com
node5.example.com
Configure these nodes to be in an inventory file where node I is a member of group dev. nodc2 is a member of group test, node3 is a member of group proxy, nodc4 and node 5 are members of group prod. Also, prod is a member of group webservers.

Answer:

Explanation:
See the Explanation for complete Solution below.
Explanation
In/home/sandy/ansible/ansible.cfg
[defaults]
inventory=/home/sandy/ansible/inventory
roles_path=/home/sandy/ansible/roles
remote_user= sandy
host_key_checking=false
[privilegeescalation]
become=true
become_user=root
become_method=sudo
become_ask_pass=false
In /home/sandy/ansible/inventory
[dev]
node1 .example.com
[test]
node2.example.com
[proxy]
node3 .example.com
[prod]
node4.example.com
node5 .example.com
[webservers:children]
prod

NEW QUESTION 20
Create a playbook calledwebdev.ymlin'home/sandy/ansible. The playbook will create a directory Avcbdev on dev host. The permission of the directory are 2755 and owner is webdev. Create a symbolic link from
/Webdevto /var/www/html/webdev. Serve a file from Avebdev7index.html which displays the text
"Development" Curlhttp://node1.example.com/webdev/index.htmlto test

Answer:

Explanation:
See the Explanation for complete Solution below.
Explanation
Solution as:

NEW QUESTION 21
Create a jinja template in /home/sandy/ansible/ and name it hosts.j2. Edit this file so it looks like the one below. The order of the nodes doesn't matter. Then create a playbook in/home/sandy/ansiblecalledhosts.yml and install the template on dev node at

Answer:

Explanation:
See the Explanation for complete Solution below.
Explanation
Solution as:

NEW QUESTION 22
Using the Simulation Program,perform the following tasks:
1. Use an ansible ad-hoc command, check the connectivity of your servers.
2. Use an ad-hoc ansible command, find the free space of your servers.
3. Use an ad-hoc ansible command, find out the memory usage of your servers.
4. Do an ls -l on the targets /var/log/messages file.
5. Tail the contents of the targets /var/log/messages file.

Answer:

Explanation:
See the Explanation for complete Solution below.
Explanation
1. ansible all -m ping
2. ansible all -a "/bin/df -h"
3. ansible all-a "/usr/bin/free"
4. ansible all -a "ls -l /var/log/messages"
5. ansible local -b -a "tail /var/log/messages"

NEW QUESTION 23
Using the Simulation Program, perform the following tasks:
Static Inventories Task:
1. Add a new group to your default ansible host file. call the group [ec2]
2. Add a newhost to the new group you created.
3. Add a variable to a new host entry in the /etc/ansible/hosts file. Add the following. localhost http_port=80 maxRequestsPerChild=808
4. Check to see if maxRequestsPerChild is pulled out with an ad-hoccommand.
5. Create a local host file and put a target group and then a host into it. Then ping it with an ad-hoc command.

Answer:

Explanation:
See the Explanation for complete Solution below.
Explanation
1. Edit the /etc/ansible/hosts file. Add a group.
2. Edit the /etc/ansible/hosts file. Add a user under the group you created.
3. Edit the /etc/ansible/hosts file. Find a host. if we add a variable called maxRequestsPerChild to the host it would look like this. host1 maxRequestsPerChild=808
4. ansible ec2 -m shell -a "echo {{ maxRequestsPerChild }}"
5. Edit a local file. It could be called anything. Lets call it myhosts. Inside the file it would have a host like the following. [mygroup] myusername1.mylabserver.com

NEW QUESTION 24
......

Pass RedHat EX447 Exam Info and Free Practice Test: https://www.vce4dumps.com/EX447-valid-torrent.html

RedHat EX447 Real Exam Questions and Answers FREE: https://drive.google.com/open?id=1qV3DY2UZA8E9v4z72UKYUUr3u6MIjPnD